- Home
- Products
- Kyowa HS1005NX4E8 detector HS1005-N + indicator HM04E8, measuring weight 20t HS Series Portable Vehicle Weight Scale Handyscale
Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa HS1005NX4E8 detector HS1005-N + indicator HM04E8, measuring weight 20t HS Series Portable Vehicle Weight Scale Handyscale
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: HS1005NX4E8 detector HS1005-N + indicator HM04E8, measuring weight 20t
It is a portable vehicle weighing scale that can measure simply by setting the same number of detection units as the wheels on a flat paved road and riding the vehicle. With an LCD display screen that imagines the arrangement of vehicle tires and a built-in printer, wheel weight, axle load, gross weight, left and right weight balance, etc. can be easily and stably measured.
Feature
- Features of the detection section
- Unique aluminum integrated structure with little eccentricity error
- Wide mounting surface that facilitates measurement with flat tires
- Rubber perimeter frame that facilitates vehicle riding
- Direct release connector that takes into account connector damage when disconnecting
- Water resistance by double-sided diaphragm type, Moisture resistance improvement indicator features
LCD display screen with contrast adjustment function that imagines the tire arrangement of the vehicle - The power supply is AC 100 ~ 240V automatic correspondence type, and can be used with DC 12V using the battery kit (sold separately) -HM04E8 (4 channels) has three modes: [Individual wheel weight display], [Axle load display], and [%display]. The M3E08 (9 channels) has two modes of “wheel weight display” and “axle load display” that can be switched with cursor keys
- The built-in printer that can be printed by entering the car number
- Interface RS-8C
Detailed functions such as “Indicator value stability mark” and “Gravity acceleration correction function”
Specification
Measured weight | 20t |
---|---|
Maximum wheel weight | 5000kg |
Minimum display | 5kg |
Overall accuracy | ±0.2% (Note 1) Overall accuracy is when used at 25±10°C. |
Detector Specifications
performance
Rated capacity | 5000kg |
---|---|
Nonlinearity | ±0.1% RO or less |
hysteresis | ±0.1% RO or less |
Repeatability | 0.1% RO or less |
Rated power | Approx. 1.0m V/V |
Environmental characteristics
Permissible temperature range | -20~70°C(no condensation) |
---|---|
Temperature Compensation Range | -10~60°C(no condensation) |
Temperature effect of zero | ± within 0.01%RO/°C |
Temperature effect of output | Within ±0.01%/°C |
Electrical characteristics
Permissible applied voltage | 20V DC |
---|---|
Recommended applied voltage | 1~10V DC |
Input resistance | 395±5Ω |
Output resistance | 350±2Ω |
cable | 0.3mm2,4-core shield chloroprene 25cm,outer diameter 6mm,tip connector plug NJW-207-AdF6 (shield is connected to the main unit) |
Mechanical properties
Permissible overload | 120% |
---|---|
mass | Approx. 20kg (including cable) |
Degree of protection | IP63 (JIS C 0920) (Note) IP63 is not a permanent specification. Water resistance may be lost depending on the usage environment. |
Indicator Specifications
Number of channels | 4 |
---|---|
What you see | Wheel weight, axle load, left and right, gross weight, ratio%, cross % |
Number of digits displayed | Individual 5 digits, total 6 digits |
Display method | LCD |
Operating temperature range | -10~40℃ |
precision | ± within 0.03%FS |
printer | 5×7 dot impact |
power | AC 100~240V or DC 10~18V Power consumption 20VA (normal), 30VA (printer operation) External battery pack can be used (model name BATKIT) (sold separately)
Power supply DC 12V |
mass | Approx. 7 kg |
interface | RS-232C |
accessory | AC power cable (3m), recording paper, ink ribbon |
Dimensions
Configuration Diagram
Remarks
* The indicator is only for remote sensing cables.