Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LBT-D-100NSA1-H Seat Belt Tension Transducer for CRS
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LBT-D-100NSA1-H
To use for measuring tensile force to install CRS (Child Restraint Seat)
Measure the sensor of seat belt tension. Compact, lightweight and disassembly-friendly design.
Specifications
Performance
| Rated Capacity | 100 N |
|---|---|
| Nonlinearity | Within ±1.5% RO (With a built-in compensation circuit) |
| Rated Output | Approx. 1 mV/V |
Environmental Characteristics
| Safe Temperature | 0 to 60ºC |
|---|---|
| Compensated Temperature | 10 to 50ºC |
| Temperature Effect on Zero | Within ±0.1% RO/ºC |
Electrical Characteristics
| Safe Excitation | 10 VDC |
|---|---|
| Recommended Excitation | 2 to 10 VDC |
| Input Resistance | 700 to 900 Ω |
| Output Resistance | 700 Ω ±3% |
| Insulation Resistance | 500 MΩ or more (With 25 VDC applied) |
| Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 120% |
|---|---|
| Enclosure | Metallic finish |
| Materials | Aluminum alloy |
| Weight | Approx. 65 g |
| Others | Not waterproofed. Single belt calibration (Our standand seat belt) Because this product has a built-in compensation circuit, use with excitation voltage of 2 to 10 VDC. (No specifications guarantee if less than 2 V excitation is used.) Data on the “Test Data Sheet” is based on 2 V bridge excitation.. |
| Cable | Box with a built-in compensation circuit is located approx. 300 mm far from the cable end. Note) Characteristic values are based on our calibration methods and conditions. *We accept calibration for the supplied seat belt. |
Dimensions
Related Products
REQUEST QUOTATION
PAYMENT
LINK
