Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LCTS-B-10KN LCTS-B Stainless Steel Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LCTS-B-10KN
The LCTS-B is a stainless-steel load cell for measuring compressive loads of hoppers and weighing tanks. The built-in steady brace mechanism makes LCTS-B suitable for weighing stirring tanks or tank feet.
Features
• Easily install on hopper’s brackets and tank’s legs
• Hermetically-sealed structure (IP67 (IEC 60529))
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | 10 kN |
---|---|
Nonlinearity | Within ±0.05% RO |
Hysteresis | Within ±0.05% RO |
Repeatability | 0.02% RO or less |
Rated Output | 2 mV/V ±0.1% |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.003% RO/ºC |
Temperature Effect on Output | Within ±0.003%/ºC |
Electrical Characteristics
Safe Excitation | 20 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 700 Ω ±0.7% |
Output Resistance | 700 Ω ±0.7% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Ultimate Lateral Load | 10 kN (Max. load which does not cause any mechanical damage) |
Weight | Approx. 5 kg (Excluding calbe) |
Materials | Stainless steel |
Degree of Protection | IP67 (IEC 60529) |
Dimensions
To Ensure Safe Usage
(Note 1) No LCTS-B is used for any onboard measurement.
(Note 2) No LCTS-B is used in an environment where it is frequently
exposed to lateral loads.
(Note 3) No LCTS-B is installed to any inclined or vertical surfaces.
∙ Accessories to Load Cells
Do not disassemble or remodel accessories such as top plate and mounting plate designed for
installation of LCTS-B series load cells.
∙ Installation of Floating Prevention Stoppers
Install the hazard prevention stopper when using in an environment where the load cell may be
damaged or the hopper or tank may overturn due to lateral loads or lateral displacement caused by thermal expansion of structure or vibration of stirrers.
Related Products
-
Shimizu Easy Double Point – Tip tool
-
Vessel No.J TORX Bit
-
Watanabe WGP-PAD RTD temperature transducer – Signal Converter
-
Kawaki RF-2 Electronic transmission type
-
Kyowa FB-40 Pore Water Pressure Gauge Filter (Flat Filter) Sensor/Transmitter Accessories
-
Obishi Keiki Seisakusho EB Ultra Precision Steel Straight Edge