Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LCW-E-5MNS LCW-E-S Washer-type Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LCW-E-5MNS
The LCW-E-S is a flat washer-type load cell. It is high stability and capable of operating under harsh conditions.
Features
• Hermetically-sealed structure with inert gas filled in
• Heat & oil resistant cable
• Load cells for individual rolling mills can also be manufactured.
Specifications
Performance
Rated Capacity | 5 MN |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Repeatability | 0.3% RO or less |
Rated Output | 1 mV/V or more |
Environmental Characteristics
Safe Temperature | -20 to 100ºC |
---|---|
Compensated Temperature | -10 to 80ºC |
Temperature Effect on Zero | Within ±0.01% RO/ºC |
Temperature Effect on Output | Within ±0.01%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±1% |
Output Resistance | 350 Ω ±1% |
Cable | 4-conductor (0.75 mm2) fluonlex shielded cable , 8 mm diameter by 15 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 16 kHz |
Weight | Approx. 20 kg (Excluding cable) |
Degree of Protection | IP64 (IEC 60529) |
Dimensions
Related Products
-
IMADA DT-STL series Light Weight Small Table
-
Hasegawa Electric HLL-6D Voltage Detector Checker (Wall Fitting Type)
-
Kyowa LCN-A-1KN LCN-A compact compression load cell
-
Nikkin Flux MG90, SRM100, TIBW500 Mother Ingot For Components Adjustment
-
Ascon ACR Series Remote Control Standard Air Blast Machine
-
Nippon Chemical Screw PEEK/(-)BT(M-L) PEEK/(-)hex bolt