Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LCX-A-2KN-ID Small-sized Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LCX-A-2KN-ID
The LCX-A-ID is a stainless-steel load cell, for measuring compressive loads. It is compact & lightweight.
Features
• Easily replace cables
• Exchange to a bending resistance cable possible
• TEDS installed
Specifications
Performance
Rated Capacity | 2 kN |
---|---|
Nonlinearity | Within ±0.1% RO |
Hysteresis | Within ±0.1% RO |
Repeatability | 0.05% RO or less |
Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -20 to 80°C (Non-condensing) |
---|---|
Compensated Temperature | -10 to 70°C (Non-condensing) |
Temperature Effect on Zero | Within ±0.005% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 375 Ω ±1.5% |
Output Resistance | 350 Ω ±1% |
Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Safe Lateral Loads | 15% the rated capacity |
Natural Frequencies | Approx. 37 kHz |
Materials | Stainless steel |
Weight | Approx. 45 g (Excluding cable) |
Degree of Protection | IP67 (IEC 60529) |
Optional Accessories | Saddle CA Mount base CX |
---|
Dimensions
Mount Base
CA-2F
Related Products
-
SANKO ELECTRONIC LABORATORY FE Exclusive Probes For SWT Series Electro-magnetic / Eddy Current Coating Thickness Metters
-
TONE 158, 168 Socket Adaptor
-
TONE HH306L Long Hexagon Socket Set (With Socket Holder)
-
Kyowa LSG-A Grip-design Steering Operation Force Transducer
-
Super Tool HKLB7S/HKLB9S Long Arm Ball-Point Hex Key Wrench
-
Chiyoda Tsusho Special Format Induction Spiral Tube