Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LMA-A-1KN LMA-A Small-sized Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LMA-A-1KN
The LMA-A is a compact & lightweight load cell for measuring compressive loads.
Features
• Moderate price
• Easy installation
• Suitable for distributed loads measurement using multiple load cells
Specifications
Performance
| Rated Capacity | 1 kN |
|---|---|
| Nonlinearity | Within ±1% RO |
| Hysteresis | Within ±1% RO |
| Repeatability | 1% RO or less |
| Rated Output | 0.75 to 2 mV/V |
Environmental Characteristics
| Safe Temperature | -10 to 60ºC (Non-condensing) |
|---|---|
| Compensated Temperature | 0 to 50ºC (Non-condensing) |
| Temperature Effect on Zero | Within ±0.05% RO/ºC |
| Temperature Effect on Output | Within ±0.05%/ºC |
Electrical Characteristics
| Safe Excitation | 7 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 5 V AC or DC |
| Input Resistance | 350 Ω ±2.5% |
| Output Resistance | 350 Ω ±2.5% |
| Cable | 4-conductor (0.035 mm2) vinyl shielded cable, 1.7 mm diameter by 2 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Natural Frequencies | Approx. 53.0 kHz |
| Weight | Approx. 11 g (Excluding cable) |
| Materials | Stainless steel |
| Degree of Protection | IP64 (IEC 60529) |
| Optional Accessories | Mount Base CFM-A |
|---|
Dimensions
Relative images
Mount Base
CFM-100A
Mount Base
| Object Product Model | LMA-A-100N LMA-A-200N LMA-A-500N LMA-A-1KN |
|---|
Related Products
-
Matsuda Seiki Rubber OA parts Roll Polishing With a Film Polishing Machine
-
Shinano SI-2033 Cut off Grinder Standard Air Tools
-
Kikusui Tape No.315 Kikurain Tape
-
Kyowa KSNB120Ωsingle axis KSNB self-temperature compensated semiconductor strain gauge
-
NAGANO KEIKI GV4_ Glycerine Bath Type Pressure Gauges
-
TSURUMI PUMP PARTS: BEARING Parts & Accessories
REQUEST QUOTATION
PAYMENT
LINK
