Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LMR-S-20KNSA2 LMR-S-SA2 Compact compression load cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LMR-S-20KNSA2
Compact and lightweight compression load cell.
Features
●High responsiveness
●Easy to install
●Suitable for load distribution measurement when mounting location is limited
Specification
Performance
Rated capacity | 20 kN |
---|---|
non-linearity | Within ±2%RO |
hysteresis | Within ±2%RO |
Rated output | 1 mV/V (2000×10 -6 strain) or more |
Environmental characteristics
Allowable temperature range | -10 to 60℃ |
---|---|
Temperature compensation range | 0 to 50°C |
Temperature effect on zero | Within ±0.05% RO/°C |
Temperature effect on output | Within ±0.05%/°C |
Electrical characteristics
Allowable applied voltage | 7V AC or DC |
---|---|
Recommended applied voltage | 1-2V AC or DC |
input resistance | 350Ω±2% |
output resistance | 350Ω±2% |
cable | 0.035mm 2 , 4-core shielded vinyl 2m, outer diameter 1.7mm, bare tip (shield not connected to main unit) |
mechanical properties
Allowable overload | 120% |
---|---|
natural frequency | about 50kHz |
mass | About 25g (not including cable) |
Material | stainless steel |
Dimensions
For proper use
Due to its small size and high capacity, the pressure on the mounting surface is high at the rated load.
Use metal of HRC40 to 44 for the mounting surface.
In addition, it is recommended that the mounting surface and the contact metal be installed on a flat surface of about Rz2.5 without unevenness.