Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LTS-50GA LTS-A Ultra Small-capacity Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LTS-50GA
Features
• Compact & lightweight
• High accuracy
• TEDS-installed models are available.
Specifications
Performance
Rated Capacity | 500 mN |
---|---|
Nonlinearity | Within ±0.5% RO |
Hysteresis | Within ±0.5% RO |
Repeatability | 0.5% RO or less |
Rated Output | 1.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -10 to 70ºC |
---|---|
Compensated Temperature | 0 to 60ºC |
Temperature Effect on Zero | Within ±0.05% RO/ºC |
Temperature Effect on Output | Within ±0.1%/ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 2 V AC or DC |
Input Resistance | 120 Ω ±10% |
Output Resistance | 120 Ω ±10% |
Cable | 4-conductor (0.05 mm2) chloroprene shielded cable, 3 mm diameter by 1 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 120% |
---|---|
Ultimate Overloads | 500% |
Natural Frequencies | Approx. 256 Hz |
Weight | Approx. 50 g (Excluding cable) |
Dimensions
To Ensure Safe Usage
∙ The load cell should be carefully installed. Especially, never apply any impact (Force) in sensitivity direction.
∙ When mounting the rod to the measuring object, do not apply any bending or twisting force.
Related Products
-
IKURATOOLS ISK-TPB3520 Tap & Bowler
-
Watanabe WGP-HS Inverting converter (Reverse converter) – Signal Converter
-
Japan Life D-Lift Metal Former (D-Lift Anchor Series)
-
Kyowa PHL-A-5MP-B PHL-A Small-sized High/Low-temperature Pressure Transducer
-
Vessel No.GT-NS10L Square Air Nipper
-
Matsumoto Kikai TH-201~203 Torch Holder, Square Flange, Holder Blanket