Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LUK-A-200KN LUK-A Tension/Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LUK-A-200KN
The LUK-A is a a thin load cell for measuring tension or compression loads. It can be installed to where the height is limited. It also suitable for fatigue test where repeativite loads are applied continuously.
Features
• Compact & lightweight
• The service life can be extended by using under one-half of the rated capacity.
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±200 kN |
---|---|
Nonlinearity | Within ±0.1% RO |
Hysteresis | Within ±0.1% RO |
Repeatability | 0.05% RO or less |
Rated Output | 2 mV/V ±1 % |
Environmental Characteristics
Safe Temperature | -35 to 80ºC |
---|---|
Compensated Temperature | -10 to 70ºC |
Temperature Effect on Zero | Within ±0.005% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±1% |
Output Resistance | 350 Ω ±1% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 7.5 kHz |
Weight | Approx. 20 kg (Excluding cable) |
Safe Lateral Force Component | 10 kN |
Safe Moments | 1 kN·m |
Degree of Protection | IP64 (IEC 60529) |
Dimensions
Related Products
-
Kyowa RA02-100K Rubber Attachment Sensor/Transmitter Accessories
-
KITAGAWA JFT-S100A Jaw Force Tester
-
Kunimoto 1064100 KS Wall Connector (For H-shaped Steel)
-
SENSEZ JW-6000 Waterproof Connector-type Pressure Sensors
-
Eagle Jack (Konno Corporation) G-40L-S454 Hydraulic Claw Jack
-
Kyowa ADT-EX-STPN RJ-45 Repeater Adapter Other Accessories