Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LUK-A-500KN LUK-A Tension/Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LUK-A-500KN
The LUK-A is a thin load cell for measuring tension or compression loads. It can be installed to where the height is limited. And also suitable for fatigue tests where repetitive loads are applied continuously.
Features
Compact & lightweight
The service life can be extended by using under one-half of the rated capacity.
TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±500 kN |
---|---|
Nonlinearity | Within ±0.2% RO |
Hysteresis | Within ±0.2% RO |
Repeatability | 0.1% RO or less |
Rated Output | 2 mV/V ±1 % |
Environmental Characteristics
Safe Temperature | -35 to 80ºC |
---|---|
Compensated Temperature | -10 to 70ºC |
Temperature Effect on Zero | Within ±0.005% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±1% |
Output Resistance | 350 Ω ±1% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 5.2 kHz |
Weight | Approx. 50 kg (Excluding cable) |
Safe Lateral Force Component | 25 kN |
Safe Moments | 2.5 kN·m |
Degree of Protection | IP64 (IEC 60529) |
Dimensions
Related Products
-
Kitz EA100/200-TLUE Type EA Electric Actuators/Class 10K Long Neck Union Nipple Bronze Ball Valves
-
Vessel No.AZ14 GIZA Bit
-
Nesstech PB-SUNS C-Bourdon Pressure Gauge
-
Vessel No.VE-5000PRSOP Electric Screwdriver (w/ Signal Output Function)
-
Nippon Chemical Screw PA66/BU(Nominal diameter) PA66 (66 nylon)/Bush
-
TERAOKA SEISAKUSHO 654S #25 Kapton(R) Film Adhesive Tape