Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa NTB-500C Medium Speed Network Terminal Box
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: NTB-500C Medium Speed Network Terminal Box
- Supports CAN communication
- Large strain (300000×10-6
- Strain) measurement
- Strain, voltage/thermocouple units available
Feature
A compact and lightweight data logger capable of simultaneous measurement of all channels at a maximum of 1 KHz. Up to 64 channels (up to 8 units synchronized) can be distributed with one wire.
Specification
| Measuring Instruments Model, Name, Type | NTB-500C DCS-100A Standard Included NTB-500C-0 DCS-100A Sold Separately |
|---|---|
| Mountable measurement unit | [Model: NTB-50C ] Name: Strain unit terminal block type: One-touch terminal block [Model: NTB-51C] Name: Voltage / thermocouple unitterminal block type: Soldering / screwing shared type* NTB-50A, NTB-50B, NTB-51A cannot be mounted*NTB-500A and NTB-500C can be connected. |
| Measurement objects and measuring units | 【Strain unit NTB-50C】 Strain gauge, strain gauge transducer 1 gauge method 120Ω 2-wire1 gauge method 120Ω 3-wire 2 gauge method 120Ω~1000Ω Active/active method 2 gauge method 120Ω~1000Ω Full bridge method【Voltage/Thermocouple Unit NTB-51C】 Voltage ±10.0000V Voltage ±50.0000V Temperature Thermocouple K |
| Number of measurement channels | Up to 8 measurement units (4 channels/unit) of 2 channels per unit can be combined |
| Synchronous operation | Up to 8 NTB-64A and NTB-500C can be connected to 500 channels |
| Automatic measurement function | After the power is turned on by the automatic measurement condition setting software, there is no data synchronization between the measuring instrument and the measuring instrument with the start of CAN data output. |
| sampling frequency | 1, 2, 5, 10, 20, 50, 100, 200, 500, 1k Hz (all channels simultaneous) sampling frequency (Hz): 1k cable length = 20 m: 8 cable length = 80 m: 4 cable length = 100 m:-Cable length = 400 m:- Sampling frequency (Hz): 500 cable length = 20 m: 16 cable length = 80 m: 8 cable length = 100 m: 4 cable length = 400 m:-Sampling frequency (Hz): 200 cable length = 20 m: 40 cable length = 80 m: 20 cable length = 100 m: 8 cable length = 400 m: 4 sampling frequency (Hz) :100 sampling frequency (Hz): 50 Cable length = 20 m: 64 cable length = 80 m: 64 cable length = 100 m: 40 cable length = 400 m: 20 sampling frequency (Hz): 20~1 m: 64 Cable length = 80 m: 64 cable length = 100 m: 64 cable length = 400 m: 64 * Communication cable length 400 m can be used with the FIRM version of the main unit 01.05 or later. |
| Cable length | Total cable length: up to 400 m |
| TEDS function | When implementing NTB-50C, TEDS Read channel name from sensor is written (when manufacturer ID is Kyowa) |
| interface | Bosch2.0B active compliant (ISO-11898 compliant high-speed CAN) |
| Data storage | Measurement data stored on PC (no internal storage) |
| Operating temperature range | -10～50℃ |
| Operating humidity range | 20~85% (non-condensing) |
| power | DC 11～16 V |
| Current consumption (at 12VDC operation) | [When two NTB-50Cs are mounted] Standby: 2mA or less Measurement operation: 200mA or less [When two NTB-230C units are mounted] Standby: 51mA or less Measurement operation: 2mA or less |
| External dimensions | 175(W) × 28.7(H) × 106.4(D) mm(excluding protrusions) |
| mass | about 490 g |
| Conformity directives | EMC Directive 2014/30/EU RoHS Directive 2011/65/EU,(EU )2015/863(10 substances) |
| Standard Accessories | DC power cable P-76 1 x ground wire P-72 1 x dummy panel for NTB-500A/C ( NTB500-DUMMY) *1*1 If there is one measurement unit for the dummy panel for NTB-1A/C, it will be shipped installed in an empty slot. Wire connection sticker, 500 rubber foot, 1 driver holders (including small drivers) Type 1 Simple Software USB/CAN Converter Driver DVD (Dynamic Data Acquisition Software DCS-4A)*1 *100 Model “NTB-2C” standard included. Model “NTB-2C-500” is sold separately. Instruction manual |
|---|---|
| Sold separately | Synchronous sampling communication cable for NTB-500A/C N-119 (1 m) *Note: Please contact us if you need cable lengths other than the above. Synchronous sampling Y cable for NTB-500A/C N-120 (0.1 m per side) connection cable N-38 (1 m) AC adapter SA-10A-EDS (AC100~240V, UNI318-1215-EDS for the United States)Strain unit NTB-50B voltage/thermocouple unit NTB-51A Coupling plate for NTB-500A/C CN-10A (for connecting 2 units), CN-11A (for connecting 4 units) dummy panel for NTB-500A/C NTB500-DUMMY DIN rail mounting plate DRA-1 DIN rail (35 mm) termination resistor CANTERM 120 USB/CAN converter LEAF LIGHT HS V2 Data Analysis Software DAS-200A NTB power supply box NTB-20A |
Dimensions
Remarks
* Cannot be combined with NTB-500C(-0) and NTB-50A/B, NTB-51A※ Cannot
be combined with NTB-50C, NTB-51C and NTB-500A(-0).
Related Products
REQUEST QUOTATION
PAYMENT
LINK
