Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PGH-S-100MPSA17 PGH-S-100MPSA17 Large-capacity Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PGH-S-100MPSA17
The PGH-S-100MPSA17 is a large-capacity pressure transducer for measuring high pressure at high temperature up to 150ºC.
Features
• Safe design with just one SUS body without welded part.
• Removable cable
• Degrees of protection IP64 (After connecting the connector)
Specifications
Performance
| Rated Capacity | 100 MPa |
|---|---|
| Nonlinearity | Within ±0.3% RO |
| Hysteresis | Within ±0.2% RO |
| Rated Output | Approx. 1 mV/V |
Environmental Characteristics
| Safe Temperature | -40 to 150°C |
|---|---|
| Compensated Temperature | -20 to 150°C |
| Temperature Effect on Zero | ±0.03% RO/ºC |
| Temperature Effect on Output | ±0.05%/ºC |
Electrical Characteristics
| Safe Excitation | 10 V AC or DC |
|---|---|
| Recommended Excitation | 2 to 5 V AC or DC |
| Input Resistance | 550 ±150 Ω |
| Output Resistance | 450 ±100 Ω |
| Cable | Fluoroplastic shielded cable, 3 mm diameter by 4 m long Sensor side: MR01-P4F Measuring instrument side: PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
| Material | Case: SUS (Metallic finish) Liquid-contacting part: SUS 630 |
|---|---|
| Weight | Approx. 40 g (Excluding cable) |
| Mounting Screw | M12, P=1 |
| Degree of Protection | IP64 (IEC 60529) (When connector is fastened to the transducer.) (The connector to measuring instrument is not waterproofness.) |
| Standard Accessories | Gasket (Mild copper) |
|---|
Dimensions
Related Products
-
Vessel No.WSA “GO-TAN” (Hard Forged) Tilt Short Socket
-
Vessel No.MX5P Double-ended MAGNUM bit (5 piece set)
-
IMADA SCX series Extra Compact Load Cell
-
NAGANO KEIKI PM1_ Liquid Column Manometers
-
Obishi Keiki Seisakusho Dial Comparator ( PH-2-Type )
-
Kyowa CW-005 Load Allowance Sensor Transmitter Accessories
REQUEST QUOTATION
PAYMENT
LINK
