Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PGL-A-5MP-A PGL-A Small-sized Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PGL-A-5MP-A
The PGL-A is a compact & lightweight pressure transducer with the semi-flush diaphragm at the end. It is high accuracy.
Features
• High stability
• High frequency response
• There are 2 types of cables: A type with removable cable and B type with integrated one
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | 5 MPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.2% RO |
Repeatability | 0.2% RO or less |
Rated Output | 2 mV/V ±20% |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 350 Ω ±2% |
Output Resistance | 350 Ω ±2% |
Cable | 4-conductor (0.18 mm2) vinyl shielded cable, 4.6 mm diameter by 3 m long Sensor side: Terminated with a connector plug HR30-6P-6S Measuring instrument side: Terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 122 kHz |
Material | Liquid-contacting part: SUS 630 Screw part: Nickel plating |
Weight | Approx. 20 g (Excluding cable) |
Degree of Protection | IP67 (IEC 60529) |
Mounting Screw | G1/8, male |
Standard Accessories | Gasket (Mild copper) (SS-105 O-ring is also usable.) |
---|
Dimensions
Related Products
-
Shinano SI-1492B 1/2″ Impact Wrench with 2″Extended Anvil Standard Air Tools
-
BIX BP4/BX4 Long-type/Extension-type Impact Sockets 12.7sq[1/2″]
-
Kyowa 1108-12A10-7F (waterproof) connector
-
Kanetec RMAW-C Round Permanent Magnetic Chuck
-
JSNDI Visual Inspection Standard Gauge
-
SAKUSAKU SAK D145S20-2D Indexable Drill