Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa S-7 curing accelerator Glue
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: S-7 curing accelerator
In order to obtain good measurement data, the strain gauge must be fully bonded to the material under measure.
It is important to choose and use an adhesive that is suitable for the material to be measured, the material of the gauge base, and the measurement conditions.
*This is an external site.
Specification
type | Curing accelerator |
---|---|
classification | Amine compound methanol |
capacity | 25g |
forte | ・Suitable for promoting curing in cold weather. For CC-33A |
Remarks
Note: The operating temperature range is the adhesive itself and varies depending on the combination with the gauge. Before use, please read the attached instruction manual carefully before use.