Japan, Maeda Koki
Maeda Koki MKCT Type Water Signal

Made in Japan
Manufacturer: Maeda Machinery Research Institute Ltd.
Model: MKCT Type
Features
- A transparent tapered tube is used, so the flow rate can be checked by looking at the relative position of the ball (or float) and the red line .
- With protective cover
- The metal protective cover reduces the possibility of damage from external impacts.
- No need to worry about the installation direction
- A spring is used inside, so the installation direction can be freely changed, such as upward, downward, or sideways.
Model list
Model | Dimensions (mm) Overall width may vary due to casting surface. | Standard specification flow rate (approx. L/min) | Flow curve table *Standard specifications (PDF document) | |||
connection | full length | Overall width | Depth | |||
MKCT20-1TW | Rc1/8 | 80 | 30 | twenty two | 1 to 5 | |
MKCT20-2TW | Rc1/4 | 80 | 30 | twenty two | ||
MKCT20-3TW | Rc3/8 | 86 | 30 | twenty two | ||
MKCT30-2TW | Rc1/4 | 100 | 44 | 32 | 4~17 | ![]() |
MKCT30-3TW | Rc3/8 | 104 | 44 | 32 | ||
MKCT30-4TW | Rc1/2 | 110 | 44 | 32 | ||
MKCT35-4TW | Rc1/2 | 148 | 50 | 44 | 8 to 30 | ![]() |
MKCT35-6TW | Rc3/4 | 148 | 50 | 44 | ||
MKCT45-6TW | Rc3/4 | 171 | 62 | 50 | 10 to 40 | ![]() |
Specifications
Specification | Details | Additional Information | |
---|---|---|---|
Fluid | Water | – | |
Flow | See above | Please contact us if you require a flow rate below or above the standard specification. | |
Connection | Rc female thread | Change to R male thread. Combination with R male thread is also possible. | |
Heatproof temperature | Maximum 80℃ | – | |
Pressure resistance | 1MPa | – | |
Material | Transparent tube | Acrylic | – |
Fittings | C3604 (Brass) | SUS products are also available. | |
Protective cover | B.C. | Aluminum versions are also available. | |
Spring | SUS304 | – | |
Nylon ball | Nylon 66 | In some cases, cylindrical floats are used. | |
O-ring | Nitrile Rubber | – |
Related Products
-
TONE 250M ISO Socket Wrench Set
-
SAKUSAKU 4SS-30D 6.0S Carbide Square End Mill 4-Flute
-
SAKUSAKU 16ER 18NPT Insert for External Threading 60°
-
Vessel No.DTC-001 Benchtop Temperature Controller
-
DIJET DNMG150404-SZ, DNMG150408-SZ Light To Medium Cutting Insert For Stainless Steel
-
Nippon Chemical Screw PVDF/CB(M-L) PVDF/hexagon socket head bolt