Made in Japan
Manufacturer: Maeda Machinery Research Institute Ltd.
Model: MKTV Type

Features of MKTV Type

• Flow rate can be seen visually
• Since a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relative position of the ball (or float) and the red line.
• With flow rate adjustment valve The required flow rate can be set by adjusting the miniature valve and aligning the ball with the red line .
• No matter the installation direction. Since a spring is used inside, the orientation when installing   can be freely adjusted such as upward, downward, sideways, etc.

Model list

Model	Dimensions (mm)				Standard specification flow rate (approx. L/min)	Flow curve table *Standard specifications
	connection	full length	Overall width	Depth
MKTV25-1TW	RC1/8	94	twenty five	51	1 to 5
MKTV25-2TW	Rc1/4	95	twenty five	51
MKTV25-3TW	Rc3/8	99.5	twenty five	51

Specifications

Specification		Details	Additional Information
Fluid		Water	–
Flow		See above	Please contact us if you require a flow rate below or above the standard specification.
Connection		Rc female thread	Change to R male thread. Combination with R male thread is also possible.
Heatproof Temperature		Maximum 80℃	–
Pressure Resistance		1MPa	–
Material	Transparent Tube	Acrylic	–
	Fittings	C3604 (Brass)	–
	Spring	SUS304	–
	Nylon Ball	Nylon 66	In some cases, cylindrical floats are used.
	Miniature Valve	B.C.	–
	O-Ring	Nitrile Rubber	–