Magnescale BD700 Laserscale

Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: BD700

Features

Capable of outputting synchronized position information in two axes.
Maximum number of divisions : 65,536, Maximum resolution : 2.1 pm
Interpolation accuracy of ±10 pm achieved by real-time signal correction processing
Supports a wide range of interfaces
Supports a maximum response frequency of 7.5 MHz for analog inputs (12.5MHz possible as special model)
Short interval accuracy can be corrected to improve cumulative accuracy
USB output of incremental data; setup and operating automated calibration.

BD700

Specifications
1 : This is our original serial communication protocol. 2 : Varies depending on installation conditions.
Communication method	Serial : To be certified by each company1 (Yaskawa Electric, FANUC, Mitsubishi Electric, BiSS C (MGS), MGS ^*1 ) 1 Simultaneous output of phase A/B and analog 1Vp-p in addition to serial communication In addition to the above, it can be connected to a PC via USB.
Maximum number of divisions	65,536 divisions
Maximum response frequency	7.5 MHz (12.5MHz possible as special model)
Reference point detection direction	Single direction
Alarm	Level down, level over, speed over
Accuracy compensation	Ability to correct accuracy in short intervals to improve cumulative accuracy
Auto Calibration	Automatically adjusts output when scale is installed
LD drive current monitoring	Measure drive current for Laser Diode
Power supply	DC +4.75 V to DC +9.75 V
Current consumption	Max. 2 A
Operating temperatu	+10 to +35 °C ^*2 (No condensation)
Storage temperature	-10 to +50 °C (Humidity below 60 %)
Mass	Approx. 650 g