Japan, Magnescale
Magnescale DK800S Series High Resolution Type
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: DK800S Series
Features
- Measuring range: 5 mm, 12 mm, 30 mm
- Maximum resolution: 0.1 µm, 0.5 μm
- Accuracy: 1 µm p-p to 1.7 µm p-p (Depends on the model)
- Maximum response speed: 80 m/min (resolution 0.1 µm), 250 m/min (resolution 0.5 µm)
- Bearing structure: Improved sliding performance through the use of highly durable ball spline bearings
- High durability: 320 million sliding cycles or more (under continuous evaluation as of January 2021)
- Protection grade: IP67 (straight type / right angle type with air tube)
- Built-in reference point
- Output signal: A/B/reference point (Voltage-differential line driver output)
- Flange type is also available for strong fixing.
Specifications
| Specifications | ||
|---|---|---|
|
||
| Model | High resolution model | General purpose resolution model |
| DK805SAR, DK805SALR, DK805SAFR, DK805SAFLR, DK805SBR, DK805SBLR, DK805SBFR, DK805SBFLR | DK805SAR5, DK805SALR5, DK805SAFR5, DK805SAFLR5, DK805SBR5, DK805SBLR5, DK805SBFR5, DK805SBFLR5 | |
| Measuring range | 5 mm | |
| Maximum resolution | 0.1 µm | 0.5 µm |
| Accuracy (at 20 °C) |
1 µm p-p | 1.5 µm p-p |
| Measuring force (at 20 °C) |
Upward: 0.35 ±0.25 N | |
| Horizontal: 0.40 ±0.25 N | ||
| Downward: 0.45 ±0.25 N | ||
| Operating temperature | 0 to +50 °C (no condensation) | |
| Storage temperature | -20 to +60 °C (90 %RH or less) | |
| Maximum response speed *1 | 80 m/min (42 m/min) | 250 m/min (100 m/min) |
| Spindle driving | Spring push (All model) Air drive by vacuum suction is possible (DK805S*LR*) |
|
| Reference point response speed | Same as maximum response speed noted above | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |
| Protection grade *2 | Straight type: IP67 / Right angle type: IP64 (IP67*3 ) | |
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |
| Impact resistance | 1,000 m/s2 (11 ms) | |
| Power supply | DC 5 V ±5 % | |
| Power consumption | 1 W | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |
| Mass*4 | Approx. 30 g | |
| Feeler | Carbide ball tip, mounting screw M2.5 | Steel ball tip, mounting screw M2.5 |
| Output cable length | 2.5 m | |
| Accessories | Instruction manual, +P M4 x 5 screws (2 pc), tightening nut, clamp spanner, wave washer, mounting pins 1 each (for DK8**S*F** only), hose elbow (for DK8**S*L** only), spanner, supplement |
|
| Specifications | ||||
|---|---|---|---|---|
|
||||
| Model | High resolution models | General purpose resolution models | ||
| DK812SAR DK812SALR DK812SAFR DK812SAFLR DK812SAVR |
DK812SBR DK812SBLR DK812SBFR DK812SBFLR DK812SBVR |
DK812SAR5 DK812SALR5 DK812SAFR5 DK812SAFLR5 DK812SAVR5 |
DK812SBR5 DK812SBLR5 DK812SBFR5 DK812SBFLR5 DK812SBVR5 |
|
| Measuring range | 12 mm | |||
| Maximum resolution | 0.1 µm | 0.5 µm | ||
| Accuracy (at 20 °C) |
1 µm p-p | 1.5 µm p-p | ||
| Measuring force (at 20 °C) |
Upward: 0.4 ±0.3 N 0.6 ±0.5 N (Pneumatic push type) Horizontal: 0.5 ±0.3 N 0.7 ±0.5 N (Pneumatic push type) Downward: 0.6 ±0.3 N 0.8± 0.5 N (Pneumatic push type) Pneumatic push: 0.055 MPa |
|||
| Maximum response speed | 80 m/min | 42 m/min | 250 m/min | 100 m/min |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Reference point response speed | Same as maximum response speed noted above | |||
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) |
|||
| Spindle driving | Spring push（DK812SAR/SAFR/SBR/SBFR/SAR5/SAFR5/SBR5/SBFR5） Pneumatic push (DK812SAVR/SBVR/SAVR5/SBVR5) Spring push / Vacuum suction (DK812SALR/SAFLR/SBLR/SBFLR/SALR5/ SAFLR5/SBLR5/SBFLR5) |
|||
| Protection grade*1 | Straight type: IP67, right angle type: IP64 (IP67*2) | |||
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |||
| Impact resistance | 1,000 m/s2 (11 ms) | |||
| Operating temperature | 0 to +50 °C (no condensation) | |||
| Storage temperature | −20 to +60 °C (90 %RH or less) | |||
| Power supply | 5 VDC ±5 % | |||
| Power consumption | 1 W | |||
| Mass*3 | Approx. 30 g | |||
| Output cable length | 2.5 m | |||
| Feeler | Carbide ball tip, Mounting screw M2.5 | Steel ball tip, Mounting screw M2.5 | ||
| Accessories | Instruction manual, +P M4 × 5 screw (2 pc), tightening nut, clamp spanner, wave washer, mounting pin 1 each (DK8**S*F** only), hose elbow (DK8**S*L** only), spanner |
|||
| Specifications | ||||
|---|---|---|---|---|
|
||||
| Model | DK830SR | DK830SLR | DK830SVR | |
| Measuring range | 30 mm | |||
| Maximum resolution | 0.1 µm | |||
| Accuracy (at 20 °C) |
1.3 µm p-p | 1.7 µm p-p | ||
| Measuring force (at 20 °C) |
|
|
||
| Operating temperature | 0 to +50 °C (no condensation) | |||
| Storage temperature | -20 to +60 °C (90 %RH or less) | |||
| Maximum response speed | 80 m/min | |||
| Reference point response speed | 80 m/min | |||
| Spindle driving | Spring push | Pneumatic push | ||
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Protection grade *1 | IP53 | IP53/IP67 *2 | ||
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |||
| Impact resistance | 1,000 m/s2 (11 ms) | |||
| Stem diameter | Φ8 mm | |||
| Feeler | Carbide ball tip, mounting screw M2.5 | |||
| Power supply | DC 5 V ±5 % | |||
| Power consumption | 1 W | |||
| Mass *3 | Approx. 70 g | Approx. 80 g | ||
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |||
| Output cable length | 2.5 m | |||
| Accessories | Spanner, instruction manual, supplement, +P M4 x 5 screws (2pc) | |||
Related Products
-
Kunimoto 1311020&1311110 KS Stanchion Pipes Support Frame
-
Nakatani Kikai FR0 Sand Rammer (Bench Type – Table Work)
-
SK Sato SK-270WP-K Waterproof Digital Thermometer Without Hole for Wall Mount
-
TONE HTX308L Long Torx Socket Set (Heavy Duty, with Socket Holder)
-
Nakatani Kikai FR4 Sand Rammer (Tamper)
-
SAKUSAKU 4SS-6.0-R1 Carbide Radius End Mill 4-Flute
REQUEST QUOTATION
PAYMENT
LINK
