,

Magnescale LY72 Counter

Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: LY72

Features

  • RS-232C standard function
  • Peak Hold Function Convenient for Statistical Measurement
  • Convenient External Input Functions for Automatic Measurement
  • Display Resolution Switching
  • Data Storage
  • Reset/Preset/Restart
  • Detecting Reference Point of Measurement Unit
  • Scaling Flicker Control

Specifications

LY72

 

Specifications

Model LY72
Specifications by application Applications as gauge (set axis labels A, B, and C) Applications as scale (set axis labels X, Y, and Z)
Number of input shafts 1 to 3 axis
Display 7 digits and minus display, Color amber
Display data Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values Current (1st axis, 3rd axis, addition axis)
Input resolution
  • Standard : 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min
  • Expanded : 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, and 1 degree can be added.
Display resolution Measuring unit input resolution or higher and supported inch units
Input signal A/B quadrature signal, Z signal (Conforms to EIA-422)
AlarmDisplay Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
Reset Current value reset, Alarm cancel
Restart Restart of peak value calculation for each axis/all axes
Preset It is possible to store/edit up to three values for each axis.
Master calibration function The master calibration value is relocated when going past the reference point after the power is turned on.
Reference point operations It is possible to store/edit one value for each axis (when not using the master calibration function).
Hold function
  • Selectable from latch and pause
  • Latch : Display held while latched (Display hold)
  • Pause : Peak calculation stopped while paused (Peak calculation hold)
Display hold
Linear compensation A fixed compensation amount is applied to the measuring unit’s count value. Compensation amount Standard: ±600 μm/m (Expanded: ±1000 μm/m)
Scaling 0.100000~9.999999
I/O
  • Data format : All axes on same line/New line for each axis Peak-to-peak value
  • Transfer rate:38400/19200/9600/4800/2400/1200bps
  • Parity : None/Odd/Even, Stop bit : 1 or 2, Data length : 8 bits or 7 bits
Timer output OFF/0.2/0.5/1/5/10/30/60/300秒
Output data Current value/Maximum value/Minimum value Peak-to-Peak value Current value
Power supply DC 12 V Rating 0.75 A, Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option
Power consumption MAX. 32 VA connected at the AC adaptor.
Temperature Operating : 0~40℃(non condensing), Storage : -20~60℃(non condensing)
Mass Approx. 1.5kg

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top