Japan, Magnescale
Magnescale MJ100/MJ110 Ribbon Type Scale (Digiruler)
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: MJ100/MJ110
Features
- Capable of 40 to 1000 divisions
- Produces AB quadrature signals with a resolution from 2 μm to 125 μm, when used in combination with the optionally available
Use the DigirulerR PL25 head unit with the SL110/130 scale unit (signal wavelength: 5 mm), or the PL60 with the SL331 scale unit (signal wavelength: 2 mm). - Supply voltage 5 V input, Line driver (EIA-422 compliance) output
- Voltage 12 to 30 V input, Open collector (lOL=50 mA maximum) output
- MJ100 also generates U/ V/ W phase output with a period of reproduced DigirulerR signal (5 mm with PL25; 2 mm with PL60)
Specifications
Specifications | |||
---|---|---|---|
*1 These valuse for a minimum phase difference of 1 μs may vary depending on the output cable length. *2 The alarm function may not operate when an abnormal offset is generated due to a broken wire, etc |
|||
Model | MJ100 | MJ110 | |
Power supplyPower supply voltage | DC5 V (4.5 V to 6 V) | DC12 V to 30 V (11 V to 31 V) | |
Power consumption | 4W | 3W | |
Output interface | Line driver (EIA-422 compliance) | NPN open collector(IOL=50mA max.) | |
Output | AB quadrature・Z phase・UVW phases・Alarm | AB quadrature・Z phase・Alarm | |
Number of divisions | 1000, 960, 800, 512, 500, 480, 400, 256, 240, 200, 128, 120, 100, 80, 64, 40 and 1/2 of each of these (which does not satisfy the synchronized reference point specifications.) | ||
Maximum response speed | 1000 divisions | 6 kHz:when connected to PL25 1800 m/min when connected to PL60 720 m/min | 600 Hz:when connected to PL25 180 m/min when connected to PL60 72 m/min*1 |
500 divisions | 15kHz:when connected to PL25 4500m/min when connected to PL60 1800m/min | 1.5 kHz:when connected to PL25 450 m/min when connected to PL60 180 m/min*1 | |
200divisions | 42kHz:when connected to PL25 12600 m/min when connected to PL60 5000 m/min | 4.2 kHz:when connected to PL25 1260 m/min when connected to PL60 500 m/min*1 | |
120 divisions | 70 kHz:when connected to PL25 21000m/min when connected to PL60 8400 m/min | 7.4 kHz:when connected to PL25 2220m/min when connected to PL60 888 m/min*1 | |
Phase difference | 100 ns | 1 μs | |
Alarm*2 | Speed alarm (minimum phase difference time or maximum response frequency); Level alarm (0.4 Vp-p or less); Minimum alarm time: approximately 400 ms | ||
System startup time | Within 0.5 seconds after the power comes on line | ||
Compatible head unit | PL25 or PL60 | ||
Operating temperature | 0°C to 45°C | ||
Storage temperature | -20°C to 60°C | ||
Dimensions | 138×93×26 (mm) ncluding protrusions | ||
Mass | 350 g | ||
Accessories | Manual・Output connector・connector cap・mounting screws・Ferrite core | ||
Option | SET-P16-1 (for external reference point) Scale extension cable, external reference point extension cable, Output connector with cable |
Related Products
-
KITAGAWA NV series Standard Chuck
-
SANKO ELECTRONIC LABORATORY SWT-7000IIIN Electro-magnetic / Eddy Current Coating Thickness Metters
-
Kondotec RB Thread Type Form Tie
-
Flex System Stainless Tarup (Popular Type)
-
TAIYO LE2 Series Press / Air-Oil (High Power System)
-
Watanabe WAP-DBZ Isolated Distributor – Signal Converter