Japan, Matsumoto Kikai
Matsumoto Kikai RNP-3/7/5-VC Nozzle Cleaner for Welding Robots
Product Made in Japan
Manufacturer : Matsumoto Kikai
Model : RNP-3/7/5-VC
ROBO-MATE is a device that automatically removes spatter adhering to the welding torch nozzle of arc welding robots and automatically applies anti-spatter adhesion liquid. In addition, there is also a type with a wire cut function that cuts the tip of the wire to keep the wire sticking out length constant and improve the arc start.
(*This is absolutely necessary when using the start point sensor.)
Features
- The main body cover is made of stainless steel, which provides anti-rust effect and suppresses the influence of anti-spatter liquid.
- All are operated by proximity switches, eliminating the need for interface work. It is easy to install and can be set immediately on any manufacturer’s robot or on already delivered robots.
- The continuous operating time of the robot is greatly extended, improving productivity and quality.
By using the RNP-3/RNP-7 in combination with the RNP-5, it is possible to perform wire cutting, nozzle cleaning, and spatter adhesion prevention liquid application.
RNP-3 type
● After removing the spatter inside the nozzle, apply anti-spatter liquid.
By cutting the wire tip ……
●There is no ball sticking to the tip, and the arc start is improved.
●Welding is stable because the wire projection length is constant.
RNP-7 type
●We adopt spring-type metal fittings of original development!
● Due to the flexibility of the spring, there is no need to worry about the tip fitting getting caught in the nozzle.
In addition, the spring can be installed with one touch. (for low current)
RNP-5-VC type
●Wire cutting function only.
●There is no uncut area because the blades cross and cut.
Specifications
model | Applicable nozzle inner diameter | Input power | Blade rotation torque (50/60Hz) |
Blade rotation speed (50/60Hz) |
Anti-spatter adhesion liquid | Body mass |
---|---|---|---|---|---|---|
RNP-3-□ | φ8,10,12,13,14,15,16,17,18,19,20mm _ |
AC1φ100V 50/60Hz |
0.9/0.8N・m | 40/48 r.pm | Protecha J | 3 kg |
RNP-7-□ | φ12, φ16mm | AC1φ100V 50/60Hz |
0.1/0.09 N・m | 1250/1550 rpm | Proteca S | 3.1kg |
model | adaptive wire | Input power | Input air source | Body mass |
---|---|---|---|---|
RNP-5-VC | Mild steel up to φ1.6mm | AC1φ100V 50/60Hz | 0.5MPa (5kgf/cm³) | 2.5kg |
Note) The □ after the model number indicates the inner diameter of the applicable nozzle.
●Specifications are subject to change without notice, so please inquire when placing an order.
Related Products
-
Chiyoda Seiki BHN-4 Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
-
Watanabe TH-41-2 2-channel unpowered isolator – Signal Converter
-
Kyowa Control Valves
-
Chiyoda Seiki DSS-10 Dry Safety Device – Gas Collecting Device – For Piping Installation – Large Flow Type
-
OSC 92LX200 series Friction Separator
-
TONE GV-301EZ, GV-302EZ SHEAR WRENCH