,

Matsumoto Kikai TA-60XW Tungsten polishing machine “Tantogi”

Product Made in Japan

Manufacturer : Matsumoto Kikai

Model : TA-60XW

Features

  • Economical table slide method!
    Since the table slides, most of the surface of the diamond disc can be used, making it very economical. In addition, it is easy to use, and you can easily polish with one hand.
  • A minimum of 20 mm can be polished!
    Using the built-in gauge, you can polish up to a minimum length of 20 mm without waste. Also ideal for extremely small torches.
  • Excellent cooling effect and long life!
    Succeeded in thermal diffusion of the polishing part by adopting a unique cooling method. It does not burn easily and there is no need to worry about chipping the polished tip.
  • Accurate polishing angle and no misalignment!
    Polishing angles of 15°, 30°, 45°, 60°, 75°, 90°, 105° and 120° can be selected for accurate reproduction. In addition, there is almost no effect of misalignment due to bending of the electrode, so it can also be used for plasma torches.
  • Friendly design that emphasizes workability and safety!
    Abrasive discs can be easily changed without tools. In addition, the transparent protective cover allows you to safely check the polishing status.

*When polishing tungsten with a diameter of 3.2 mm or more, rough grinding with a grinder beforehand will reduce wear on the disc and shorten the polishing time.

*If the tungsten itself has a large bend, misalignment may occur.

*The number of pieces that can be polished decreases as the pressing pressure on the table surface increases.

Number of times that can be polished with one disc

Tungsten electrode diameter φ1.0 φ1.6 φ2.4 φ3.2 φ4.0 φ4.8
Recommended angle 15° 30° 45° 60° 75° 90°
Polishing times About 3500 times
or more
About 1700 times
or more
About 800 times
or more
About 450 times
or more
About 300 times
or more
About 200 times
or more

Note) When using 4 stages on the disc surface.

Specifications

Model TA-60XW
Power-supply voltage AC1φ100V 1.3A
frequency 50/60Hz
Rated speed 2500/3000rpm
Rated output 60W
Specification rate continue
External dimensions (W×D×H) 102×245×195mm
Body mass 4kg

Standard configuration

body set
collet For φ1.6 For φ2.4 (1 each)
diamond disc 1 sheet

Selected parts

collet
φ1.0 φ2.0 φ3.2 φ4.0 φ4.8

Note) ●Polishing angle may be limited by tungsten diameter.
●Specifications are subject to change without notice, so please inquire when placing an order.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top