Japan, MAXPULL
Maxpull Noiseless manual winch (NSIL type)
Product made in Japan
Manufacturer: Maxpull
Model: GM-1-NSIL type / GM-3-NSIL type / GM-5-NSIL type / GM-10-NSIL type / GM-20-NSIL type / GM-30-NSIL type
Features
This type is equipped with noiseless brakes that do not make ratchet sounds.The two magnetic flux enhancement plates and the anisotropic permanent magnet work to enable noiseless winding and unwinding.It
can be manufactured for each model of steel GM type and MC type.When ordering , please specify, for example, GM-5-NSIL.
Easy operability
Due to its high mechanical efficiency, the manual load during operation is very light compared to winches manufactured by other companies, making work easier . fixed with the prescribed bolts. Another big feature is that each part is made by press processing, and the whole is assembled with bolts, so it can be easily disassembled. In the case of repair, anyone can easily perform repair and assembly by simply purchasing the parts and following the instruction manual.
Outstanding durability
All bearings use ball bearings from leading manufacturers.It is light to wind up and exhibits outstanding strength against wear.In addition, the speed reducer adopts our unique shifting method gear that has been subjected to special heat treatment, allowing work to be performed with ease The mechanical brake also has a mechanism that allows you to freely adjust the gap, so it has excellent durability . in robustness.
Safety you can trust
Carefully selected materials and advanced design and technology boast an extremely high level of safety.In particular, the parts where the load is applied intensively are combined with precision press-processed ribs or double plates to further increase strength.A double safety mechanism is adopted for the mechanical brake, so even if an impact is applied to the claw arm, no braking will occur. In addition, the wire rope is fixed to the drum with a double safety structure that uses a special drum that ensures waste winding . can be fixed to the drum easily and securely with the included hexagonal L-shaped wrench. All are highly reliable and safe designs unique to our company.
Designed with the quietness of the brake part in mind
This type is equipped with a noiseless brake that was developed to prevent the operating sound generated by the manual winch from spreading in a quiet environment.
into contact with the ratchet gear while the handle is being operated, enabling noiseless winding and lowering . .
*Stainless steel is non-magnetic, and MR type cannot be manufactured (NSIL) due to the problem of clicking noise generated from the ratchet handle. *
With this method, it is not possible to idle the drum by releasing the brake from the outside .
Specifications
Model | GM-1-NSIL type | GM-3-NSIL type | GM-5-NSIL type | GM-10-NSIL type | GM-20-NSIL type | GM-30-NSIL type |
wire rope tensile force | 980N (100kgf) φ5 wire rope winding 4th layer standard |
2940N (300kgf) φ6 wire rope winding 5th layer standard |
4900N (500kgf) φ6 wire rope winding 5th layer standard |
9800N (1000kgf) φ8 wire rope winding 3rd layer standard |
19600N (2000kgf) φ9 wire rope winding 3rd layer standard |
29400N (3000kgf) φ12 wire rope winding 3rd layer standard |
Wire rope capacity | φ5×35m (6 layers winding) | 6×32m (6 layers winding) | φ6×40m (6 layers winding) | φ8×35m (5 layers winding) | φ9×38m (5 layers winding) | φ12×35m (4 layers winding) |
Deceleration ratio | 1/1 | 1/6.25 | 1/8,9 | 1/12.6 | 1/20 early volume 1/4 | 1/35.5 |
Handle operating force | 1st layer: 143N (14.6kgf) 3rd layer: 187N (19.0kgf) 4th layer: 208N (21.2kgf) |
1st layer: 76N (7.7kgf) 3rd layer: 103N (10.5kgf) 5th layer: 131N (13.3kgf) |
1st layer: 109N (11.1kgf) 3rd layer: 142N (14.4kgf) 5th layer: 174N (17.7kgf) |
1st layer: 133N (13.5kgf) 2nd layer: 157N (16.0kgf) 3rd layer: 182N (18.5kgf) |
1st layer: 157N (16.0kgf) 2nd layer: 186N (18.9kgf) 3rd layer: 214N (21.8kgf) |
1st layer: 137N (13.9kgf) 2nd layer: 169N (17.2kgf) 3rd layer: 201N (20.5kgf) |
Handle length (effective maximum) | 250mm | 250mm | 250mm | 300mm | 370mm | 370mm |
Weight (Body + Handle) | 7.2kg | 14.1kg | 15.4kg | 16.4kg | 28.2kg | 37.7kg |
An example of NSIL type usage site
Related Products
-
Fukudaco High-Precision Table Bearing
-
Fujii Denko SAF-2-NV93-NV (with twin-lanyard) Industrial Safety Belt
-
Nitta Valve Built In Connector
-
Fuji Tool Measuring Clip
-
Tokyo Ko-on Denpa 2R6-A/ 4R6-A Rotary Switch
-
TSURUMI PUMP PARTS: FLOWVIS® H2FLOW CONTROLS FLOW METER/CHECK VALVE 2″ 2.5″ Parts & Accessories