Japan, NAGANO KEIKI
NAGANO KEIKI PD23 Bench Type Deadweight Tester

Made in Japan
Manufacturer: NAGANO KEIKI
Model: PD23 Bench Type Deadweight Tester <Pressure range:10 to 50MPa>
The PD23 Dead-Weight Testers are standard pressure gauges for inspection and calibration of other pressure gauges. They can be used as on-site bench type pressure standards in the high pressure range (10 to 50MPa).
Features
・The PD23 is for medium pressure use. A preliminary pump and fine adjustment pump are incorporate to make pressure adjustment easily.
・Since there are two gauge ports, pressure measurements can be performed efficiently.
・Pressure can also be measured by installing a test gauge to one of the gauge ports instead of deadweight.
・The pressure gauge can be easily mounted and dismounted from the mounting base with the quick fastening nut.
・Level, and level surface adjuster are the standard equipment.
・JCSS Calibration Certification
・NKS Inspection Certificate and Pressure standard Inspection available.
・Since there are two gauge ports, pressure measurements can be performed efficiently.
・Pressure can also be measured by installing a test gauge to one of the gauge ports instead of deadweight.
・The pressure gauge can be easily mounted and dismounted from the mounting base with the quick fastening nut.
・Level, and level surface adjuster are the standard equipment.
・JCSS Calibration Certification
・NKS Inspection Certificate and Pressure standard Inspection available.
Catalog Download: E-PD23_H_20180424Fsgg
Other items of NAGANO KEIKI
Request the quotation for NAGANO KEIKI
Related Products
-
Tosei Sharyo SA Series Gold Caster
-
Nitta RFID Magnetic Sheet
-
Fukuda Chemical Injection and Sterilization Grundfos Pump
-
Tohnichi AP2 Power Torque Wrench
-
Kitz 10STBF/10STLBF 10K Ball Valve (Full Bore)
-
Chiyoda Seiki GS-2000PH Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 1.0 to 6.0 MPa, standard flow rate: 2700 m3/h・Air)