Japan, Naigai Rubber Industry Co.,Ltd
Naigai Patent number 3766190 Acceleration Sensor
Made in Japan
Manufacturer: Naigai Rubber Industry Co.,Ltd
Model: Patent number 3766190
3-axis acceleration sensor
The axial acceleration sensor is a new type of acceleration sensor that detects acceleration in a three-dimensional space represented by the X, Y, and Z axes by separating it into acceleration components for each axis. A capacitive method is used to detect acceleration, resulting in a simple structure and low price.
Earthquake detectors using this acceleration sensor can be flexibly customized to meet customer requirements, such as for detecting vertical vibrations or rolling vibrations from all horizontal directions.
Absolute Mazimum Rating
specification | For high sensitive | Unit | Notes |
Storage tem. | -25~80 | ℃ | |
Operation temp. | -10~50 | ℃ | No Condensation |
Power supply voltage | -0.3~7 | V |
Specifications
Specification items | Data [typ] | unit | remarks |
Drive voltage | Five | V | |
Detection direction | 3 axes (X, Y, Z axes) | ||
Output format | PWM output | Output smoothing is required | |
Rated acceleration | ±1.5 | G | Full Scale |
Detection sensitivity | 105 | mV/G | |
linearity | ±2 | %FS | |
Zero point output | 2350 (X, Y axis) 2350 (Z axis) |
mV | |
Sensitivity temperature characteristics | ±3 | mV | -20℃~+80℃ |
response frequency | DC~50 | Hz | |
Other axis sensitivity | ±3 | % | |
resonant frequency | 100 | Hz | |
power consumption | Four | mA |
*This specification data is based on room temperature of 25℃.
Lead |
Red: Power supply (DC5V) |
Black: GND |
Green: X-axis output (Vx) |
White: Y-axis output (Vy) |
Yellow: Z-axis output (Vz) |
Note) Lead wires may differ depending on the product.
Purpose of use (actual results)
seismic sensor | Gas control, elevator control, electronic control, plant control, multi-story parking lot |
Measuring instrument | Inclinometer, seismometer |
Civil life | virtual reality |
Machine tools/robots | Abnormal vibration detection |
Caution
- There is a resonance frequency in the vicinity of the upper limit of the frequency response. Please do not apply in particular resonant frequency over frequency response. It may cause of the damage.
- Please do not apply excessive shock even after transport and installation becaue of the high sensitive sensor.
- Because of the sensor improvements, there is a case to change the specifications without notice this specification.
Related Products
-
Nippon Chemical Screw PEEK GF30/W(d-D-t) PEEK/GF30 washer
-
Fukuda Seiko SSD Solid Carbide Tip Straight Shank Drill
-
Vessel N0.4100 Power Socket Screwdriver
-
Seiwa E04FD070503 Ferrite Cores for FPC FD Type EMC Products
-
Kawasaki KPT-0511 Low Vibration Multi Purpose Cutter Equipment
-
Vessel No.3500E-4 Wire Stripper with Thread Cutter (For Solid Wire, Stranded wire)