Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/BC(M)
Polyetheretherketone bolt cap (T type).
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
- Common type for plastic screws and metal screws.
- A set of hex bolt cap and lid.
・Screws are sold separately. - There may be some wobbling, but this will not cause any problems in use.
・ Common type of plastic screw and metal screw.
・ Set of cover and cap of hexagon bolt.
・ Screws are sold separately.
・ Although there may be misalignment to some extent, it does not pose any problem in use.
Sales unit Quantity
Torsional rupture torque
Tensile rupture force
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
