Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/BT(M-L)
Polyetheretherketone hex bolt.
Continuous use temperature |
260°C/500°F |
Combustion quality |
UL94V-0 |
M |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
B×H |
7×2.8 |
8×3.5 |
10×4 |
13×5.5 |
17×7 |
19×8 |
L(mm) |
8 |
100 |
─ |
─ |
─ |
─ |
─ |
10 |
100 |
100 |
100 |
100 |
─ |
─ |
12 |
100 |
100 |
100 |
100 |
─ |
─ |
15 |
100 |
100 |
100 |
100 |
50 |
─ |
16 |
─ |
─ |
100 |
─ |
─ |
─ |
20 |
100 |
100 |
100 |
100 |
50 |
50 |
25 |
100 |
100 |
100 |
100 |
50 |
50 |
30 |
─ |
100 |
100 |
100 |
50 |
50 |
35 |
─ |
─ |
100 |
100 |
50 |
50 |
40 |
─ |
─ |
100 |
100 |
50 |
50 |
45 |
─ |
─ |
100 |
100 |
50 |
50 |
50 |
─ |
─ |
100 |
100 |
50 |
50 |
70 |
─ |
─ |
─ |
─ |
─ |
50 |
100 |
50 |
50 |
50 |
50 |
─ |
─ |
Sales unit Quantity
Torsional rupture torque
Unit/Unit |
M1.7 |
M2 |
M2.5 |
M2.6 |
M3 |
M4 |
N m |
0.038 |
0.071 |
0.15 |
0.15 |
0.21 |
0.47 |
Unit/Unit |
M5 |
M6 |
M8 |
M10 |
M12 |
M16 |
N m |
0.96 |
1.64 |
3.68 |
7.9 |
13.64 |
– |
Tensile rupture force
Unit/Unit |
M1.7 |
M2 |
M2.5 |
M2.6 |
M3 |
M4 |
N |
81 |
165 |
264 |
291 |
405 |
738 |
Unit/Unit |
M5 |
M6 |
M8 |
M10 |
M12 |
M16 |
N |
1234 |
1749 |
3261 |
5256 |
7650 |
– |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.