Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/LMCH(M-L)
3 types of polyetheretherketone microchemist screws.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M1.2 | M1.4 | M1.6 |
| pitch | 0.25 | 0.3 | 0.35 |
| D×H | 2×0.7 | 2.5×0.8 | 2.8×0.8 |
| L (mm) | 1.5 | 100 | ─ | ─ |
| 1.8 | 100 | ─ | ─ |
| 2 | 100 | 100 | 100 |
| 2.5 | 100 | 100 | 100 |
| 3 | 100 | 100 | 100 |
| 3.5 | 100 | 100 | 100 |
| 4 | 100 | 100 | 100 |
| 6 | ─ | 100 | 100 |
Torsional rupture torque
| Unit/Unit | M1.2 | M1.4 | M1.6 |
| N•m | 0.027 | 0.031 | 0.041 |
Sales unit Quantity
Tensile rupture force
| Unit/Unit | M1.2 | M1.4 | M1.6 |
| N | 58 | 82 | 94 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
