Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/PBO 19.5-24-36L PEEK/Ω (omega type)
Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/PBO 19.5-24-36L
Polyetheretherketone Ω (Omega type).
Continuous use temperature | 260°C/500°F |
Combustion quality | UL94V-0 |
Inner diameter | 19.5 | |
Outer diameter | 24 | |
free length | 36 | |
Close contact length | 18 | |
spring constant | 1.17~1.69 | |
─ | ─ | 1 |
Sales unit Quantity
- Spring constant (N/mm), adhesion length, and spring constant are reference values.
- Durability and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions.
- Constant of sprong (N/mm)
- Closed length and spring rate are reference values.
- Since durability and chemical resistance change based on usage conditions, please test under actual usage conditions beforehand.
Torsional rupture torque
─ Tensile rupture force
─ - We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.