Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/PH(Thread size-L) PEEK/(+) inch pan head machine screw
Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK/PH(Thread size-L)
Polyetheretherketone (+) inch pan head machine screw.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| Thread size | #2-56 | #4-40 | #6-32 | #8-32 | #10-24 | #10-32 | 1/4-20 | |
| Thread Series | UNC | UNC | UNC | UNC | UNC | UNF | UNC | |
| D×H(inch) | 0.167×0.058 | 0.219×0.080 | 0.270×0.097 | 0.322×0.115 | 0.373×0.133 | 0.373×0.133 | 0.492×0.175 | |
| L(mm/inch) | 4.76 (3/16) | 100 | 100 | ─ | ─ | ─ | ─ | ─ |
| 6.35(1/4) | 100 | 100 | 100 | 100 | ─ | ─ | ─ | |
| 7.94(5/16) | 100 | 100 | 100 | 100 | ─ | ─ | ─ | |
| 9.53(3/8) | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
| 12.7(1/2) | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
| 15.87(5/8) | ─ | 100 | 100 | 100 | 100 | 100 | 100 | |
| 19.05(5/8) | ─ | 100 | 100 | 100 | 100 | 100 | 100 | |
| 22.22(7/8) | ─ | 100 | 100 | 100 | 100 | 100 | 100 | |
| 25.4(1″) | ─ | 100 | 100 | 100 | 100 | 100 | 100 | |
| 31.75(1-1/4) | ─ | ─ | ─ | ─ | ─ | ─ | 100 | |
| 38.1(1-1/2) | ─ | ─ | ─ | ─ | ─ | ─ | 50 | |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | 2-56 | 4-40 | 6-32 | 8-32 | 10-24 | 10-32 | 1/4-20 |
| N・m | 0.1 | 0.19 | 0.33 | 0.61 | 0.84 | 0.95 | 2.04 |
| ft-lb | 0.074 | 0.14 | 0.243 | 0.45 | 0.62 | 0.701 | 1.505 |
Tensile rupture force
| Unit/Unit | 2-56 | 4-40 | 6-32 | 8-32 | 10-24 | 10-32 | 1/4-20 |
| N | 181 | 306 | 459 | 746 | 919 | 1090 | 1742 |
| lbF | 40.69 | 68.79 | 103.18 | 167.7 | 206.59 | 245.03 | 391.6 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
