Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/SN(M-L) PEEK/spacer nut
Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/SN(M-L)
polyetheretherketone spacer nut.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M3 | M4 | M5 | M6 | M8 | |
| pitch | 0.5 | 0.7 | 0.8 | 1 | 1.25 | |
| B | 6 | 7 | 8 | Ten | 13 | |
| L(mm) | 4 | 100 | ─ | ─ | ─ | ─ |
| 5 | 100 | 100 | ─ | ─ | ─ | |
| 5 | 100 | 100 | 100 | ─ | ─ | |
| 8 | 100 | 100 | 100 | ─ | ─ | |
| 10 | 100 | 100 | 100 | ─ | ─ | |
| 12 | 100 | 100 | 100 | ─ | ─ | |
| 15 | 100 | 100 | 100 | 100 | ─ | |
| 18 | 100 | 100 | 100 | 100 | ─ | |
| 20 | 100 | 100 | 100 | 100 | 50 | |
| 25 | 100 | 100 | 100 | 50 | 50 | |
| 30 | 100 | 100 | 100 | 50 | 50 | |
| 35 | ─ | 100 | 100 | 50 | 50 | |
| 40 | ─ | ─ | 100 | 50 | 50 | |
| 50 | ─ | ─ | ─ | 50 | 50 | |
Sales unit Quantity
Torsional rupture torque
| ─ |
Tensile rupture force
| ─ |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
-
Kurimoto KI2148, KI2154, KI2160, KI2460, KI2760, KI2772, KI3072 Standard Screening Equipment
-
OSC56FM101 Ultra Low Temperature Freezer (-85deg.C)
-
Eisen ECP Series Pin Gauge
-
LOBTEX RH-A Ratchet Handle
-
Niigata Seiki AAI-100K/ AAI-150K Blade Steel Square I-Type
-
Showa Measuring Instruments HVS Pressure Transducers
