Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK/W(d-D-t)
polyetheretherketone washer.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| Nominal diameter | 2 | 2.6 | 3 | 4 | 5 | 6 | 8 | 10 |
| d×D | 2.1×4 | 2.7×6 | 3.2×7 | 4.3×9 | 5.3×10 | 6.4×12.5 | 8.4×17 | 10.5×21 |
| t | 0.5 | 0.5 | 0.5 | 0.8 | 1 | 1.6 | 1.6 | 2 |
| ─ | ─ | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
Sales unit Quantity
Torsional rupture torque
Tensile rupture force
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
