Japan, Nippon Seimitsu
Nippon Seimitsu SST Series Dust Collector For Fine Dust
Product Made in Japan
Manufacturer: Nippon Seimitsu Co., Ltd.
Model: SST Series (SST-1-P-C/SST-2-P-C/SST-3-P-C/SST-5-P-C)
A top fan type packaged dust collector that enables the collection of fine dust.
Nippon Seimitsu’s “SST series” is a dust collector that is ideal for collecting fine dust and fumes.
By using a special oval filter, it is compact yet has a large filtration area. This solves the problems of powder clogging in the grooves and poor dust removal properties during pulse dusting, making it possible to collect highly concentrated dust.
The equipment specifications of this product can be changed according to the application, and it is effective in places that require the pursuit of an ideal working environment, such as food factories, pharmaceutical factories, and chemical plants.
Variation
- Built-in HEPA filter
- Lower hopper type
- Outdoor installation type
- Explosion-proof type
- Type with explosion vent, etc.
Optional Filter
You can change the filter to the following specifications depending on the collection target.
| Specification | Model |
|---|---|
| Anti-static | E |
| Teflon Coating | M |
| Teflon Coating + Anti-static | ME |
Trapezoidal Filter
This filter solves the problem of powder accumulation in grooves and poor dust separation during pulse cleaning that occurs with conventional cylindrical filters. By making the filter trapezoidal, it is possible to ensure 1.3 to 1.5 times the filtration area compared to cylindrical filters while maintaining a compact size.
Device Specifications
Ideal for collecting fine dust and fumes.
Useful in places that require an ideal working environment, such as food factories, pharmaceutical factories, and chemical plants.
| Model | SST-1-P-C | SST-2-P-C | SST-3-P-C | SST-5-P-C |
|---|---|---|---|---|
| Power Source | 3-phase 200V 50 or 60Hz | |||
| Air Volume | 9 m³/min | 18 m³/min | 27 m³/min | 42 m³/min |
| Static Pressure | Approx. 1.5 kPa | |||
| Filter Area | Approx. 10 m² | Approx. 15 m² | Approx. 22.5 m² | Approx. 37.5 m² |
| Filter Material | Polyester (Standard) | |||
| Dust Collection Capacity | Approx. 38 L | Approx. 64 L | Approx. 90 L | Approx. 110 L |
| Weight | Approx. 130 kg | Approx. 190 kg | Approx. 260 kg | Approx. 360 kg |
| Supply Air Pressure | 0.5 MPa | |||
| Air Consumption | Approx. 20 NL/min | Approx. 30 NL/min | Approx. 50 NL/min | Approx. 60 NL/min |
| Dimension | SST-1-P-C | SST-2-P-C | SST-3-P-C | SST-5-P-C |
|---|---|---|---|---|
| A | 750 | 793 | 813 | 968 |
| B | 872 | 923 | 1263 | 1363 |
| C | 2005 | 2085 | 1990 | 2110 |
| D | 1370 | 1420 | 2000 | 2100 |
| E | 900 | |||
| F | 100 | 150 | 175 | 250 |
| G | 160 | 210 | 250 | 300 |
*We also manufacture machines above SST-5-P-C. We will comprehensively propose collection hoods, pressure loss calculations, and machine selection.
Custom Specifications
| Specification | Notes |
|---|---|
| Stainless | Change material to stainless steel. Mirror finish processing is also available. |
| Control Panel | Supports remote start, fault signal output, and program control. |
| Soundproofing and Insulation | Supports soundproof box and low-noise operation. |
| Separate Blower Type | For high-speed fans, compatible with top fan separate installation. |
| Dust Box | Can be changed to a lift-up type and increase box capacity if required. |
| Painting | Supports heat-resistant paint and durable paint as specified. |
| Others | Supports specifications other than those listed above. |
Due to the quality of performance products, specifications may change without notice.
Please understand. Do not collect dust with high explosive risk such as aluminum, magnesium, or zinc.
Consult us when using in explosive atmospheres or high temperature environments.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
