Manufacturer: Nissan Tanaka
Model: TORR-30

Low-pressure, standard model for the primary side low-pressure use: TORR-30

Features

• The TORR series is a pressure regulator that can be considered synonymous with “pressure regulators for semiconductor gases” thanks to its long track record and high reliability.
• Assembly is carried out in a clean room of class 1000, ensuring a cleanliness level of 0.3μm or better.
• We have integrated filters into the flow path of the primary chamber to reduce internal leaks.
• We conduct shipment inspections on all units, including helium leak testing.
• We can also produce electrolytic polishing specification products (surface roughness of the metal parts for gas connection: Ra0.25μm).
• The TORR-30 series is a standard model for low-pressure applications and can be widely used in facilities after decompression, such as valve boxes and indoor piping installation.

Basic Specifications

Use materials
Gas connection part
Main body: SUS316L
Diaphragm: SUS316L
Filter: SUS316L
Pressure Gauge: SUS316L (Screw-type connection)
Joint or fitting: SUS316L (Welded connection)
Other gas contact parts: SUS316L, SUS316, Fluororesin
Non-contact gas part
Cap: C3771
Pressure regulating handle: ABS plastic, C3604

Performance
Inlet side maximum working pressure: 5MPa
Outlet side maximum working pressure: 1.0MPa
Maximum flow rate: 300L/min(nor)（P1=10MPa, P2=0.6MPa, N₂ GAS）
Operating temperature: -5～40℃
Weight: 1.1kg
Built-in filter filtration degree: 20μm
Diameter of inlet and outlet ports: 1/4″
External leak amount: 1.3×10^-9Pa・m3/sec below (Screw-type connection) & 1.3×10^-10Pa・m3/sec below (Welded connection)

Flow Characteristics Diagram

Appearance

Description

Designated Attention

※1 If you select the 4-port specification, please select the symbol for the primary side pressure gauge from the following and replace the product name assembly with A0.

Primary side pressure gauge symbol	Maximum operating pressure
03：-0.1～0.3MPa（0.2MPa)	30：-0.1～3.0MPa（2.0MPa)
06：-0.1～0.6MPa（0.4MPa)	50：0～5.0MPa（3MPa)
10：-0.1～1.0MPa（0.6MPa)	A0：0～10MPa（5MPa)
15：-0.1～1.5MPa（1.0MPa)

※2 In the ‘SH’ series, which uses a Ni-Cr-Mo alloy of high corrosion-resistant alloy for the metal parts connected to the gas, it cannot be supported. The Ni-Cr-Mo alloy is equivalent to the ‘Hastelloy C-22’ of the American Haynes company.
※3 In the case without a secondary side pressure gauge, the symbols for each usage pressure are as follows:

Operating Pressure	Symbol
～0.2MPa	03
～0.4MPa	06
～0.6MPa	10
～1.0MPa	15

※4 You can only select fitting type S (Swagelok).
※5 Different symbols will apply for other shapes.
※6 Using italic fittings requires essentially a welded connection, whereas for other types of fittings, you will essentially have a threaded connection.
※7 You can select only fitting types S (Swagelok) and F (Finelok).
※8 Even when using “SH”, the gas contact metal part of the pressure gauge will be SUS316L. Please contact us if you desire a pressure gauge that uses Ni-Cr-Mo alloy in the gas contact metal part.

⚠️Warning: For correct usage, please make sure to read the ‘Instruction Manual’ carefully before use.

---

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka