,

Nitta Plafix Intelimer™Tape

Product Made in Japan
Manufacturer: Nitta
Model: Plafix

Plafix

PlafixSpecificayion

Product codeTack temperatureTack strength at 50ºC
(For polyimide)
N/25mm
Tack strength decreasing rateGlue thickness
CS2325NA3>25℃
(50ºC recommended)
3.5>90% at <10℃
(5ºC recommended)
25μm
CS2325NA41.4
CS2325NA20.4

※Tack strength with PI film when peeled off at 180º

HOW TO USE

  • This tape is tacky at 25ºC or above. It recommended to heat it to 50°C when affixing to workpieces.Use a rubber roller to avoid bubbles when affixing the tape.
  • This tape loses its tackiness at 10ºC or below.It is recommended to cool it down to 5ºC or below when workpieces are released.
  • Keep the workpieces and tape at the prescribed temperature when performing the above-mentioned operation.

Recommended usage

Temporary fixing for a fiexible device manufacturing process

From glass substrate to FPC! From rigid to fiexible!!

Flexible displays that could not be produced on existing lines can now be manufactured on the same equipment by temporarily fixing the film to the glass base using Intelimer™ Tape.PlafixTM is tolerant to all processes including TFT, TP and CF, and can be peeled off without damaging the film-formed substrates after the process is finished.

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top