• Becomes sticky when cooled down to below the switching temperature.
• Adhesion releases when warmed up to above the switching temperature.
• Switching temperature can be set freely between 30 and 50ºC.

Warm-off type is suitable for applications where workpieces are fixed and processed at room temperature.
Because the adhesion releases by warming and the tape does not damage works,
the tape is suited for dicing electronic components and more.

HOW TO USE

• Peel the transparent PET separator from the tape. Since the tape is tacky at room temperature, affix it to the target location using a rubber roller, etc.
  Pass the rubber roller back and forth over the tape with little force 2 or 3 times.
  Pressing hard with the roller will keep the tape from peeling or may leave glue on the target surface.
• Use this tape for application at temperature below 50ºC.
• To peel the tape after the work, heat up the workpiece and tape to above 60ºC.
  Peel the tape off at 60ºC or higher temperature. If attempted below 60ºC,
  the adhesive force is still active, making it harder to peel the tape off.

DATA

PRECAUTIONS FOR USE

• Affixing the tape
  This tape is tacky at room temperature,but its adhesive force changes according to temperature,pressure and other factors. Therefore,test the tape before actual use.
• Peeling the tape
  This tape loses its tackiness at 60ºC and higher temperatures, but its release depends on bonding conditions, etc. Also note that peeling the tape below 60ºC can damage the target surface.

SPECIFICATION

＊1：Double-sided type also available.　＊2：Compliant with JIS Z0237

APPLICATION

● Warm-off tape applicable to various purposes

Eco-friendly tape that can be peeled by just changing the temperature.

● For wafer or device dicing

Workpieces can be freely released by heating the tape
Proposal for dicing application