Japan, NOHMI BOSAI
NOHMI BOSAI FMM01U Series Manual Fire Alarm Station/ Manual Release Station
Made in Japan
Manufacturer: NOHMI BOSAI
Model: FMM01U Series
Features of FMM01U Series
- Single or dual action
- Key reset
- Wire leads or terminal connectors
- Gold plated SPST and contacts
- High-gloss enamel finish
- Plastic break rod
Description of FMM01U Series
- The FMM01U series are die-cast metal fire alarm pull stations available in either single or dual action configuration with Single Pole Single Throw (SPST) contacts.
- Also either lead wire or terminal strip connection is available in the series.
- The normally-open contact, which closes when the pull station is activated, is rated for 1A, 30VDC.
- The contacts are gold plated to avoid the risk of corrosion.
- The FMM01U series station can be reset by dedicated key after activation.Applicable addressable modules are Miniature Contact Module (FRRU004-MCM), Single Contact Module (FRRU004-SCM4) and Dual Contact Module (FRRU004-DCM4).
- The FMM01U series are operated by pulling the handle on the front of the station as far down as it will go, at which point the handle locks into place and is easily visible from up to 50 feet.
- The handle is reset by opening the station with the key, placing the handle in the normal upright position and re-locking the station.
- On the dual action modules, the push rod rotates inward allowing the pull handle to be grasped in one handed motion.
- The FMM01U series can also be used for manual release stations to activate gaseous fire suppression systems.
Specification
No. | Item | Specification |
---|---|---|
1 | Switching rating | 1A at 30 VDC, 1A at 125 VAC |
2 | Dimensions | 120mm (4.72 inches) (H) x 80mm (3.15 inches) (W) x 30mm (1.18 inches) (D) |
3 | Applicable electrical box installation | North American 2-1/2 inches (64mm) single gang box |