Japan, NPK
NPK Sand Rammers
Made in: Japan
Manufacturer: NPK
Sand Rammers
The sand rammers are easy to handle and ensure even sand compaction. A necessary air implement for foundries, as an alternative. In the even of the steel batt causing damage to the mold. Use of the rubber batt is suggested. Optional steel batt is available for all models.
Specification
＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
| Model | Piston diameter | Piston stroke | Overall length | Mass | Butt diameter | Air inlet thread | Hose size | Average air consumption |
| mm | mm | mm | kg | mm | Rc | mm | m3/min | |
| B-00A | 18 | 60 | 337 | 2.1 | 40 | 1/4 | 9.5 | 0.2 |
| B-0A | 22 | 60 | 380 | 3.1 | 50 | 1/4 | 12.7 | 0.25 |
| B-1A | 25.4 | 110 | 502 | 5.4 | 64 | 3/8 | 12.7 | 0.4 |
| F-00 | 18 | 60 | 390 | 2.1 | 40 | 3/8 | 9.5 | 0.2 |
| F-0 | 22 | 60 | 435 | 3.1 | 50 | 3/8 | 12.7 | 0.25 |
| F-1 | 25.4 | 110 | 1,142 | 6.8 | 64 | 3/8 | 12.7 | 0.4 |
| F-2 | 32 | 120 | 1,204 | 9.0 | 70 | 3/8 | 12.7 | 0.55 |
| F-4 | 40 | 120 | 1,209 | 12.0 | 87 | 3/8 | 12.7 | 0.85 |
Related Products
-
Koizumi Sokki KP-21C Intelligent Planimeter
-
Chiyoda Seiki GS-3000PH Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 1.0 to 6.0 MPa, standard flow rate: 4800 m3/h・Air)
-
Eight Tool TLC-S7 Color Wrench
-
NAC- TL TYPE Steel (Zinc-plated) PM (Male thread)
-
Super Tool BST33515 / 34020 / 43728B～89055B Four Faces Jig Block T-Slot Type (14 / 16) for MC
-
Kitz AKTAF Type 600 Brass Ball Valves (Full Bore)
