Japan, NPK
NPK Die Grinders
Made in: Japan
Manufacturer: NPK
Die Grinders
Die grinders are suitable for precise, delicate finishing as required in handling small points and burrs.
Specification
＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
| Model | type | collet size | Max. free speed | Over- all length | Mass | Air inlet thread | Hose size | Average air con- |
| min-1 | mm | kg | Rc | mm | m3/min | |||
| RG-16BK-06 | Lever | 6mm | 38,000 | 178 | 0.4 | 1/4 | 6.3 | 0.25 |
| RG-25-06 | Lever | 6mm | 30,000 | 174 | 0.52 | 1/4 | 6.3 | 0.4 |
| RG-25-20 | Lever | 1/4″ | ||||||
| RG-382B-06 | Grip | 6mm | 25,000 | 184 | 0.5 | 1/4 | 9.5 | 0.5 |
| RG-382B-20 | Grip | 1/4″ | ||||||
| RG-383A-06 | Lever | 6mm | 25,000 | 178 | 0.6 | 1/4 | 9.5 | 0.5 |
| RG-383A-20 | Lever | 1/4″ | ||||||
| RG-38CA-06 | Grip | 6mm | 22,000 | 189 | 0.5 | 1/4 | 9.5 | 0.5 |
| RG-38CA-20 | Grip | 1/4″ | ||||||
| RG-38CX-06 | Lever | 6mm | 22,000 | 183 | 0.6 | 1/4 | 9.5 | 0.5 |
| RG-38CX-20 | Lever | 1/4″ | ||||||
| RG-16BKLW-06 | Lever | 6mm | 38,000 | 178 | 0.4 | 1/4 | 6.3 | 0.25 |
| RG-16BKLW-20 | Lever | 1/4″ | ||||||
| RG-25LW-06 | Lever | 6mm | 30,000 | 176 | 1.1 | 1/4 | 6.3 | 0.4 |
| RG-25LW-20 | Lever | 1/4″ |
Related Products
-
TONE BPL700 & BPL900 Long Ball Point Hex Key Wrench Set L-Type
-
Miyakawa ESA-3R Self-Propelled High Speed Chamfering Machine
-
Magnescale LH70 Digital Readout
-
DIJET TNMG160404-KG, TNMG160408-KG, TNMG160412-KG Semi-Finishing Insert
-
YAMARI Special Sensor For Power Generation Plant
-
Asahi Bagnall Cat.No.314 Bar Ear
