Japan, NPK
NPK Straight Grinders
Made in: Japan
Manufacturer: NPK
Straight Grinders
A full range of straight grinders isprovided.
Specification
＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
| Model | Whee l size | Max. free speed | Over-all length | Mass | Air inlet thread | Hose size | Average air con- sumption |
| mm | min-1 | mm | kg | Rc | mm | m3/min | |
| NHG-65KA | – | 19,000 | 311 | 1.3 | 1/4 | 9.5 | 0.55 |
| NHG-65KA-S | – | 19,000 | 311 | 1.4 | 1/4 | 9.5 | 0.55 |
| NHG-65LKA | – | 19,000 | 511 | 1.6 | 1/4 | 9.5 | 0.55 |
| NHG-65LKA-75 | – | 19,000 | 756 | 2.2 | 1/4 | 9.5 | 0.55 |
| NHG-65D | 65 x 13 x 9.5 | 14,600 | 310 | 1.3 | 1/4 | 9.5 | 0.55 |
| NHG-65LD | 65 x 13 x 9.5 | 14,600 | 510 | 1.6 | 1/4 | 9.5 | 0.55 |
| NHG-65LD-75 | 65 x 13 x 9.5 | 14,600 | 756 | 2.2 | 1/4 | 9.5 | 0.55 |
| NHG-100A | 100 x 19 x 12.7 | 9,500 | 366 | 2.3 | 3/8 | 12.7 | 0.65 |
| NHG-125 | 125 x 19 x 12.7 | 7,500 | 405 | 3.2 | 3/8 | 12.7 | 0.90 |
| NHG-150 | 150 x 25 x 15.9 | 6,200 | 440 | 4.6 | 3/8 | 12.7 | 1.1 |
| NHG-65KLWA | – | 19,000 | 339 | 1.3 | 1/4 | 9.5 | 0.55 |
| NHG-65LKLWA | – | 19,000 | 539 | 1.6 | 1/4 | 9.5 | 0.55 |
| NHG-65LKLWA-75 | – | 19,000 | 756 | 2.2 | 1/4 | 9.5 | 0.55 |
| NHG-65DLW | 65 x 13 x 9.5 | 14,600 | 338 | 1.3 | 1/4 | 9.5 | 0.55 |
| NHG-65LDLW | 65 x 13 x 9.5 | 14,600 | 538 | 1.3 | 1/4 | 9.5 | 0.55 |
| NHG-100ALW | 100 x 19 x 12.7 | 9,500 | 411 | 2.3 | 3/8 | 12.7 | 0.65 |
| NHG-125LW | 125 x 19 x 12.7 | 7,500 | 452 | 3.2 | 3/8 | 12.7 | 0.90 |
| NHG-150LW | 150 x 25 x 15.9 | 6,200 | 486 | 4.6 | 3/8 | 12.7 | 1.10 |
Related Products
-
NDV Porcelain lining Other lining body/flange connection type Corrosion resistant valves of clamp connections/flange connections
-
Flex System FD Insert
-
SUGIYASU BX50B Mobile Lift Table
-
Vessel No.A14H TAPPING Bit(High power tip)
-
Kitz 10UOA(T),10UOAM(T) Stainless & High Alloy 10K Swing Check Valve
-
TONE 4AP-LLN Wheel Nut Protector Socket For Impact Socket (Long, Thin Type)
