Japan, Obishi Keiki
Obishi Keiki Seisakusho Graduated Square with Base ( C Type ) ( Production Example )
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
- On the long side exterior angle side surface, there is 1 mm interval graduation (One surface only)
- Use for measurement of tools perpendicularity, and squareness of parts attached using jigs, products squareness, etc
- The short side is thick making it possible for stable measurement.
- Also very convenient for use as a marking square.
- The long side and short side are joined using a special method.
| Nominal Measurement | Measurement (H×L×W×tmm) | Squareness (μm) | Mass (kg) |
| 100 | 100×75×12 | ±15 | 0.15 |
| 150 | 150×100×18 | ±18 | 0.35 |
| 200 | 200×130×20 | ±20 | 0.7 |
| 300 | 300×200×27 | ±25 | 1.6 |
| 400 | 400×210×25 | ±30 | 2.0 |
| 600 | 600×335×30 | ±40 | 5.0 |
| 1000 | 1000×430×55 | ±60 | 15.5 |
Related Products
-
SAKUSAKU 4SS-25D 5.0S Carbide Square End Mill 4-Flute
-
Chiyoda Seiki DSS-10 Dry Safety Device – Gas Collecting Device – For Piping Installation – Large Flow Type
-
SAKUSAKU WNMG080404-UC Turning Insert 35° Triangular/Negative
-
Kurimoto C2F-63 Forging Press
-
Atom Kousan Petalor Conductive Type (AS series)
-
Hammer Caster 540 S0H / 545 S0H / 540 SHR 65 / 75mm Caster
