Japan, Obishi Keiki
Obishi Keiki Seisakusho Level Tester
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Model : AZ101
Stock No : 500
- Very convenient for Level Sensitivity, Levelness inspection and Levelness examination.
- The core interval for this equipment is 500mm. Normal Level Sensitivity id displayed in 1m. On this equipment the dial gauge reading value multiplied × 2 will be the level sensitivity.
NOTE: Level and Dial Guage are not included. They have to be provided separately.
| Code No. | Nominal | floor surface Measurement (L×W mm) | Upper surface Measurement (L×W mm) | Core interval Distance (mm) | Flatness (μm) | Mass (kg) |
|---|---|---|---|---|---|---|
| AZ101 | 500 | 623×267 | 530×60 | 500 | 10 | 20 |
NOTE
| What is Level Sensitivity | The inclination required to change the bubble chamber’s bubble graduation by 1. This means the height (Unit : mm) or Angle (Unit : seconds) in relation to base 1m.Height relations in relation to angle and base is as follows Angle 1 seconds = 4.85μm per 1m ≈5μm per 1m
| |
| Types of Levels | Division | Sensitivity (mm/m) |
| Type 1 | 0.02 (≈4″) | |
| Type 2 | 0.05 (≈10″) | |
| Type 3 | 0.1 (≈20″) | |
Related Products
-
Sawada RGC type Level gauge – Two-color Level Gauge
-
Kondotec Togging Ring
-
Tohnichi Interchangeable Socket – Socket For Hex Head Cap Screws
-
Organo FP-0500 Cabinet-Type Ultrapure Water System
-
Tokyo Sokushin TOBS-24N Ocean Bottom Seismograph
-
KONAN YS271 Zero-differential Pressure Pilot-acting 2-port Solenoid Valves Normally Closed Type
