,

Orientalmotor BXII Series Brushless Motors

Made in Japan
Manufacturer: ORIENTAL MOTOR CO., LTD.
Model: BXII Series

Speed Control

Wide Speed Control Range 2~4000 r/min

Achieved speed ratio of 1:2000.
  Suitable for applications that require constant torque from low to high speeds. (30~4000 r/min at analog setting.)

120 W Motor Speed - Torque Characteristics Diagram

Stable Motor Drive

Speed Regulation ±0.05 %

Reduces speed variation due to changes in the load (load fluctuation) and the change of ambient environment (changing ambient temperature, voltage fluctuation).

Flutter Characteristics Effective Value: Approx. 0.1 %

The effective value of the flutter characteristics, which represents speed fluctuations of motor rotation, is about 0.1 %. (Reference value at rated speed)
Even when rotating at a certain speed, there will be slight fluctuation in the actual speed around the target rotation speed. Flutter happens when speed fluctuates due to mechanical interactions.

Supports Multi-Speed Operation with Up to 16 Speeds

Up to 16 points of operation data, such as operating speed and acceleration/deceleration time, can be set.

16-Speed Multi-Speed Operation

Position Control

Operation and Switch Up to 16 Data Points With Just I/O

You can set up to 16 points of operation data such as travel amount and operating speed.

Operation and switching of data with I/O

Linking Multiple Operation Data

In addition to single data setting, you can also set linked operation, which combines multiple operation data.

Linked Operation

*Dwell time is the wait time until the next positioning operation starts.

Continuous Rotation in the Same Direction is Possible

When the command position exceeds the “wrap setting range” parameter value, the system can return the command position and multiple rotation data to 0. This reset of the multiple rotation data allows for continuous rotation in the same direction.

Wrap Setting

Vertical Operation and Position Holding

All models can be selected with or without an electromagnetic brake. The electromagnetic brake is automatically controlled to turn ON/OFF according to the operation command signal to the driver.

Capable of Vertical Operation (Gravitational operation)

With an electromagnetic brake, stable speed control is possible even when driving vertical operation.

Gravitational Operation Capability

Capable of Position Holding When Stopped

Position holding when driving in a vertical direction* or horizontal direction is possible.
When driving horizontally, it is possible to set servo lock at motor standstill, which excites the motor to generate a holding force.

*For vertical operation (gravitational operation), use a product with an electromagnetic brake.

Prevents Loads From Falling in an Emergency

The electromagnetic brake is of the power off activated type, so it works automatically even when power is lost in a blackout. Instantly stops the motor and prevents the load from falling.

Torque Limiting Function

It can be used for applications that require adjustment of torque and tension, such as tension (brake), pushing (pressing), and tightening.

Tension – As a Brake to Gain Tension

Tension (Brake)

Pushing – For Printing and Other Press Applications

Pushing (Pressing)

The setting range of the maximum instantaneous torque of the motor can be limited from 0 to 250 % in 1 % units.

  • Torque limiting accuracy ±10 % approx. (relative to rated torque)
  • Torque limiting can be switched ON/OFF with an external signal (TL input)
Torque Limiting Function

Support Software, Monitoring Function

Easy Setting and Start-Up With MEXE02 Support Software

By using the support software MEXE02, you can set and edit operation data and various parameters, as well as teach and monitor various conditions.

Comprehensive Support From Start-Up to Maintenance With a Variety of Functions

Useful functions for wiring check and test operation are provided.

  • Setting and Saving of Operation Data
  • I/O Monitor
  • Teaching, Remote Operation
The following functions are available to help you adjust motor operation after the equipment is installed.

Waveform Monitor

Diagnostic and maintenance functions are available for trouble diagnosis and maintenance after operation is started.

  • Alarm Monitor
  • Status Monitor
  • Warning Monitor

Operation Data/Parameter Setting Screen Waveform monitor

On-Site Monitoring and Troubleshooting are Also Possible

Speed and alarm information can be monitored on the driver’s display screen. Data setting and test operation are also possible at the operation panel.

Alarm Code Indication          Load factor indication
[Alarm code indication]      [Load factor indication]

If the OPX-2A control module is connected, operation becomes even easier.

OPX-2A

Reduction of Installation Space

Compact Driver for Close Installation to Reduce Installation Space.

Optimized arrangement of internal parts has made the drivers compact and slim. It also supports close installation of multiple units, further reducing installation space.

Close Installation

Gearhead Type

Gearhead Types Parallel Shaft Gearhead Hollow Shaft Flat Gearhead
GFS Gearhead FR Gearhead
External View GFS Gearhead FR Gearhead
Features
  • Steel Shaft
  • Wide Range of Gear Ratio
  • Space Saving, Cost Saving
  • High Permissible Torque
Output Power 30 W, 60 W, 120 W
200 W, 400 W
30 W, 60 W, 120 W
200 W, 400 W
Gear Ratio 5~200 5~200
Rated Life 10000 hours 10000 hours
Permissible Radial Load* 1400 N 2040 N
Permissible Axial Load* 400 N 800 N
Permissible Torque* 70 N·m 54 N·m

*This value is for output power of 200 W, 3000 r/min, and the maximum gear ratio.

Significantly Increases Permissible Load Flange Drive Adapter (Sold separately)

Mounting on a parallel shaft gearhead increases permissible radial and axial loads.

Flange Drive Adapter

Product Line

The motor, driver, and connection cable can be purchased individually.

Select a Combination

Note

The motor cable and the encoder cable from the motor cannot be connected directly to the driver.
Be sure to purchase a connection cable or flexible connection cable.

Output Shaft Type*1 Frame Size
[mm]
Rated Output Power
[W]
Gear Ratio Rated Voltage
[V]
Connection Cable*2
GFS Gearhead

Parallel Shaft Gearhead GFS Gearhead

60 30 5~200 Single-Phase 100-120
Single-Phase, Three-Phase 200-240
Connection Cable
0.3 m~30.3 m

Flexible Connection Cable
1.3 m~30.3 m

Cable for Motor
For Motor
Cable for Encoder
For Encoder
80 60
90 120
110 200
400 Single-Phase, Three-Phase 200-240
FR Gearhead

Hollow Shaft Flat Gearhead FR Gearhead

60 30 5~200 Single-Phase 100-120
Single-Phase, Three-Phase 200-240
80 60
90 120
104 200 10~100
400 5~100 Single-Phase, Three-Phase 200-240
BXII

Round Shaft Type

60 30 Single-Phase 100-120
Single-Phase, Three-Phase 200-240
80 60
90 120
104 200
400 Single-Phase, Three-Phase 200-240

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top