,

Orientalmotor MBD Series DC Centrifugal Blower

Made in Japan
Manufacturer: ORIENTAL MOTOR CO., LTD.
Model: MBD Series

Ventilation and Cooling With High Static Pressure

Used for spot cooling because it sends out air in a concentrated direction.
The high static pressure also makes it suitable for cooling equipment through which air cannot flow easily, and for air flow and exhaust using ducts.
It can also be used for applications that require suction/adsorption of load.

Spot Cooling of Load

Centrifugal blowers with high static pressures are suitable for the spray cooling of load following heat treatment.

Spot Cooling of Load

Exhaust With Ducts

These fans have a high static pressure and are suitable for applications that use ducts to suck dust in the air.

Air flow and cooling of narrow widths and thin spaces

An alarm signal is output when the rotation speed of the fan deteriorates due to ingress of foreign particles, etc. This helps with predictive maintenance of equipment issues, as fans can be ordered and replaced before equipment is damaged by heat. It also allows replacement of only those fans with deteriorating cooling capacity when there are multiple fans installed. It can limit the impact on the equipment to minimum.

Low-speed alarm for early detection of deterioration of air flow capacity

Pulse Sensor Equipped

A signal of 2 pulses per revolution is output while the fan is being driven.
By checking for changes in pulse signals, the status of the fan can be constantly monitored. Also ideal for equipment that needs to run 24 hours a day.

MBD

*Pulse sensor type is scheduled to be discontinued.

Product Line

Fan Only

Series Power Supply Voltage
[V]
Impeller Diameter [mm]
φ80 φ100 φ120
MBD Series 24 VDC
48 VDC

Fan Kit

Fan kit products that include all the necessary accessories are available.

Series Fan Kit Product Line Power Supply Voltage
[V]
Impeller Diameter [mm]
φ80 φ100 φ120
MBD Series With mounting bracket and finger guard

With mounting bracket and filter
24 VDC
48 VDC

*Products with power supply voltage 48 VDC and the pulse sensor type are scheduled to be discontinued.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top