Japan, Measuring Instrument
OSC92ET211 Eddy Current Thickness Tester
Model: OSC92ET211
Features
– It can measure most of the coatings on the metal and non-metal by the non-destructive method in a short time.
– Measurement and calibration are easy by using a PC.
– Measurement mode can be selected, which makes it easier to measure the small parts, like the top of the screw, wire material, or die-casting products.
– Automatic acquisition mode takes the reading automatically when the probe is touched and released from the measuring object.
– 70 kinds of calibration curves are saved as standard. When a new calibration curve is needed, it can be set up by using thickness standards.
– Measurement unit: mm, um, mil, MI, A
The unit can be changed anytime and the measurement value is changed automatically.
Specifications for the main unit
| Measurement mode | Thickness measurement | ||||||||||||||
| Channel | 40 channels | ||||||||||||||
| Data volume | 100,000 data | ||||||||||||||
| Statistics process | Max. value, Min. value, average value, standard deviation | ||||||||||||||
| histogram, up-low limited value setting | |||||||||||||||
| Power supply | AC100-240V±10%, 50/60Hz | ||||||||||||||
| Weight | Approx. 3.0kg (main unit) | ||||||||||||||
| Dimension | 280(W) x 230(D) x 88(H)mm (main unit) | ||||||||||||||
Specifications for the probe
| Effective range | φ 5mm (using minute probe: φ 3mm） | ||||||||||||||
| Length of probe code | 900mm | ||||||||||||||
| *Probe type | MP type: for flat, uneven curved surface (standard) | ||||||||||||||
| MPG type: for flat, uneven curved surface (w/guide) | |||||||||||||||
| SM type: for flat, uneven curved surface (minute) | |||||||||||||||
| RP type: for concave curved surface, inside surface of pipe | |||||||||||||||
| SR Type : for the inside surface of small diameter pipe | |||||||||||||||
| Probe guide | # 180: for flat surface measurement | ||||||||||||||
| # 120: for φ 25-60mm for convex curved surface | |||||||||||||||
| # 90: for under φ 30mm for convex curved surface | |||||||||||||||
* Each probe type has four kinds depends on the thickness, A, B, C and D
Combination of plating and substrate
