,

Ross Asia 21 Series Inline Poppet Valves For Vacuum Applications

Made in Japan
Manufacturer : Ross Asia
Model : 21 series

Valves for Vacuum Applications

Vacuum service valves are ideal for lifting, holding, vacuum packaging and moving anything from large objects to tiny particles.
They also provide an effective means for leak testing. The vacuum source typically comes from either a vacuum pump or a venturi.
In vacuum service applications, the pressure within the valve is reduced below atmospheric pressure. Consequently, atmospheric pressure actually pushes air into the valve, instead of the common belief that air is “sucked” in by the vacuum.

Valves for Full Vacuum Applications

Full vacuum valves are ideal for applications where compressed air is unavailable. Full vacuum valves use the difference in
force between atmospheric pressure and the vacuum within the valve to actuate the valve. The full vacuum valve performs with atmospheric pressure in port 1 and 10 to 30 inches of Mercury vacuum in the valve body.

VALVE FEATURES

Poppet Design
Poppet construction for high dirt tolerance
ROSS vacuum valves have larger orifices, allowing greater flow and easing the transport of air even though there is a small differential between the vacuum within the valve and atmospheric pressure outside the valve
Mounting Options Can be mounted close to actuator, reducing length of pipe to be pressurized/exhausted on each cycle
Pilot Supply Internal or external; easily field-convertible for use with an external pilot supply
High Velocity Near zero leakage
Positive Sealing No sliding action to prevent damage and wear
Reliability Consistent response times over the life of the valve
Important Note:
Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.

Specifications

Ordering Information

2/2 Solenoid Pilot Controlled Valves for Vacuum Applications

Piping 2/2 Normally Closed (NC) or Normally Open (NO) Valves.
Pipe the unit into the system by connecting the vacuum source or pump to the normal air pressure inlet port (port 1). The normal outlet port is the work port (port 2).
Note: 2/2 vacuum valves provide only on/off control and do not have an exhaust function

                                            SOLENOID PILOT CONTROLLED VALVES 2-Way 2-Position Valves
Size Function Valve Model Number
Body Port 1 Port 2 NPT Thread G Thread
24 V DC 110-120 V AC 230 V AC 24 V DC 110-120 V AC 230 V AC
3/8 1/4 1/4 NC 2171B2901W 2171B2901Z 2171B2901Y D2171B2901W D2171B2901Z D2171B2901Y
3/8 3/8 NC 2171B3906W 2171B3906Z 2171B3906Y D2171B3906W D2171B3906Z D2171B3906Y
1/2 1/2 NC 2171A4917W 2171A4917Z 2171A4917Y D2171A4917W D2171A4917Z D2171A4917Y
3/4 3/4 3/4 NC 2171B5905W 2171B5905Z 2171B5905Y D2171B5905W D2171B5905Z D2171B5905Y
1 1 NC 2171B6904W 2171B6904Z 2171B6904Y D2171B6904W D2171B6904Z D2171B6904Y
1-1/4 1 1 NC 2171B6916W 2171B6916Z 2171B6916Y D2171B6916W D2171B6916Z D2171B6916Y
1-1/4 1-1/4 NC 2171B7901W 2171B7901Z 2171B7901Y D2171B7901W D2171B7901Z D2171B7901Y
1-1/2 1-1/2 NC 2171B8906W 2171B8906Z 2171B8906Y D2171B8906W D2171B8906Z D2171B8906Y
NO 2172B8900W 2172B8900Z 2172B8900Y D2172B8900W D2172B8900Z D2172B8900Y
2 1-1/2 1-1/2 NC 2171B8900W 2171B8900Z 2171B8900Y D2171B8900W D2171B8900Z D2171B8900Y
2-1/2 2-1/2 NC 2171B9901W 2171B9901Z 2171B9901Y D2171B9901W D2171B9901Z D2171B9901Y
Size Function Flow C V  (Nl/min) Average Response Constants Weight lb (kg)
Body Port 1 Port 2 USA F
3/8 1/4 1/4 NC 2.1 (2066) ten 0.96 3.0 (1.4)
3/8 3/8 NC 2.6 (2558) ten 0.90
1/2 1/2 NC 2.6 (2558) ten 0.82
3/4 3/4 3/4 NC 7.8 (7675) 14 0.39 3.3 (1.5)
1 1 NC 8.3 (8167) 14 0.32
1-1/4 1 1 NC 20 (19680) 14 0.31 7.5 (3.4)
1-1/4 1-1/4 NC 30 (29520) 26 0.19
1-1/2 1-1/2 NC 31(30504) 26 0.14
NO 21 (20664) 26 0.17
2 1-1/2 1-1/2 NC 57 (56088) ## ## 15.5 (6.9)
2-1/2 2-1/2 NC 64 (62976) ## ##
Valve Response Time – Response Time (msec) = M + (F • V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to
exhaust it to 10% of supply pressure. M and F values are shown above.

Valve Technical Data

2/2 Solenoid Pilot Controlled Valves for Vacuum Applications
Dimen

Dimensions Inches (mm)

Valve Body Size 3/8
Valve Body Size 3/4
Valve Body Size 1-1/4
Valve Body Size 2

3/2 Solenoid Pilot Controlled Valves for Full Vacuum Applications

Full Vacuum – 3/2 Normally Closed (NC) Valves

This valve functions as a normally open valve. Pipe the unit into the system by connecting the vacuum source or pump to port 3, the normal exhaust. Leave port 1 open to atmosphere, and the normal outlet remains as the work port (port 2).

Full Vacuum – 3/2 Normally Open (NO) Valves

This valve functions as a normally closed valve. Pipe the unit into the system by connecting the vacuum source or pump to port 3, the normal exhaust. Leave port 1 open to atmosphere, and the normal outlet remains as the work port (port 2).

SOLENOID PILOT CONTROLLED VALVES 3-Way 2-Position Valves
Size Function Valve Model Number
Body Port 1 Port 2 Port 3                                     NPT Thread G Thread
24 V DC 110-120 V AC 230 V AC 24 V DC 110-120 V AC 230 V AC
3/8 1/4 1/4 1/2 NC 2173B2900W 2173B2900Z 2173B2900Y D2173B2900W D2173B2900Z D2173B2900Y
3/8 3/8 1/2 NC 2173A3908W 2173A3908Z 2173A3908Y D2173A3908W D2173A3908Z D2173A3908Y
1/2 1/2 1/2 NC 2173B4901W 2173B4901Z 2173B4901Y D2173B4901W D2173B4901Z D2173B4901Y
3/4 1/2 1/2 first NC 2173B4902W 2173B4902Z 2173B4902Y D2173B4902W D2173B4902Z D2173B4902Y
1/2 1/2 first NO 2174A4912W 2174A4912Z 2174A4912Y D2174A4912W D2174A4912Z D2174A4912Y
3/4 3/4 first NC 2173B5900W 2173B5900Z 2173B5900Y D2173B5900W D2173B5900Z D2173B5900Y
1 1 1 NC 2173B6901W 2173B6901Z 2173B6901Y D2173B6901W D2173B6901Z D2173B6901Y
1-1/4 1 1 1-1/2 NC 2173B6902W 2173B6902Z 2173B6902Y D2173B6902W D2173B6902Z D2173B6902Y
1 1 1-1/2 NO 2174A6914W 2174A6914Z 2174A6914Y D2174A6914W D2174A6914Z D2174A6914Y
1-1/4 1-1/4 1-1/2 NC 2173B7901W 2173B7901Z 2173B7901Y D2173B7901W D2173B7901Z D2173B7901Y
1-1/4 1-1/4 1-1/2 NC 2173A7917W 2173A7917Z 2173A7917Y D2173A7917W D2173A7917Z D2173A7917Y
1-1/2 1-1/2 1-1/2 NC 2173B8900W 2173B8900Z 2173B8900Y D2173B8900W D2173B8900Z D2173B8900Y
2 2 2 2-1/2 NC 2173A9905W 2173A9905Z 2173A9905Y D2173A9905W D2173A9905Z D2173A9905Y
2-1/2 2-1/2 2-1/2 NC 2173A9906W 2173A9906Z 2173A9906Y D2173A9906W D2173A9906Z D2173A9906Y
Size Function Flow C V  (Nl/min)
Average Response Constants
Weight lb (kg)
Body Port 1 Port 2 Port 3 USA F
1-2 2-3
1-2 2-3
3/8 1/4 1/4 1/2 NC 2.4 (2362) 3.4 (3346) ten 1.76 2.08 3.0 (1.4)
3/8 3/8 1/2 NC 3.0 (2952) 5.8 (5707) ten 0.95 1.07
1/2 1/2 1/2 NC 3.0 (2952) 5.2 (5117) ten 0.94 0.98
3/4 1/2 1/2 1 NC 6.6 (6494) 12 (11808) 11 0.58 0.64 3.3 (1.5)
1/2 1/2 1 NO 6.5 (6396) 7.0 (6888) 11 0.58 0.64
3/4 3/4 1 NC 7.8 (7675) 13 (12792) 11 0.38 0.41
1 1 1 NC 7.5 (7380) 12 (11808) 11 0.24 0.36
1-1/4 1 1 1-1/2 NC 24 (23616) 40 (39360) 28 0.16 0.18 7.5 (3.4)
1 1 1-1/2 NO 15 (14760) 17 (16728) 28 0.16 0.18
1-1/4 1-1/4 1-1/2 NC 29 (28536) 39 (38376) 28 0.12 0.17
1-1/4 1-1/4 1-1/2 NO 21 (20664) 23 (22632) 28 0.15 0.19
1-1/2 1-1/2 1-1/2 NC 30 (29520) 38 (37392) 28 0.12 0.16
2 2 2 2-1/2 NC 70 (68880) 70 (68880) ## ## ## 16.5 (7.4)
2-1/2 2-1/2 2-1/2 NC 70 (68880) 71 (69864) ## ## ##
Valve Response Time – Response Time (msec) = M + (F • V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to
exhaust it to 10% of supply pressure. M and F values are shown above.

3/2 Solenoid Pilot Controlled Valves for Full Vacuum Applications

2/2 Pressure Controlled Valves for Vacuum Applications

Piping 2/2 Normally Closed (NC) or Normally Open (NO) Valves
Pipe the unit into the system by connecting the vacuum source or pump to the normal air pressure inlet port (port 1). The normal outlet port is the work port (port 2).
Note: 2/2 vacuum valves provide only on/off control and do not have an exhaust function.
PRESSURE CONTROLLED VALVES 2-Way 2-Position Valves
Size Function Valve Model Number
Body Port 1 Port 2 NPT Thread G Thread
3/8 1/4 1/4 NC 2151A2901 D2151A2901
1/2 1/2 NC 2151A4910 D2151A4910
3/4 1/2 1/2 NC 2151B4904 D2151B4904
3/4 3/4 NC 2151A5913 D2151A5913
3/4 3/4 NO 2152A5901 D2152A5901
1 1 NC 2151B6900 D2151B6900
1-1/4 1 1 NC 2151A7909 D2151A7909
1-1/4 1-1/4 NC 2151B8900 D2151B8900
1-1/2 1-1/2 NO 2152B7900 D2152B7900
Size Function Flow

C V  (Nl/min)

Average response constant Weight lb (kg)
Body Port 1 Port 2 USA F
3/8 1/4 1/4 NC 2.1 (2066) ten 0.96 1.8 (0.8)
1/2 1/2 NC 3.0 (2952) ten 0.90
3/4 1/2 1/2 NC 6.9 (6790) ten 0.82 4.5 (2.0)
3/4 3/4 NC 7.8 (7675) 14 0.39
3/4 3/4 NO 7.0 (6888) 14 0.37
1 1 NC 8.3 (8167) 14 0.19
1-1/4 1 1 NC 30 (29520) 26 0.14 11.0 (5.0)
1-1/4 1-1/4 NC 31 (30504) 26 0.13
1-1/2 1-1/2 NO 23 (22632) 26 0.17
*Valve response time – Response time (msec) = M + (F • V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 10% of supply pressure. M and F values are shown above.

3/2 Pressure Controlled Valves for Vacuum Applications

Piping 3/2 Normally Closed Valves
In this valve configuration, pipe the unit into the system by connecting the vacuum source or pump to the normal air pressure inlet port (port 1). The normal outlet port is the work port (port 2), and the normal air pressure exhaust port becomes the atmosphere port (port 3).
PRESSURE CONTROLLED VALVES 3-Way 2-Position Valves
Size Valve Model Number
Body Port 1 Port 2 Port 3 NPT Thread G Thread
3/8 1/4 1/4 1/2 2153B2900 D2153B2900
3/8 3/8 1/2 2153A3913 D2153A3913
1/2 1/2 1/2 2153B4903 D2153B4903
3/4 3/4 3/4 1 2153B5903 D2153B5903
1 1 1 2153A6906 D2153A6906
1 1 1-1/2 2153C6905 D2153C6905
1-1/4 1-1/4 1-1/4 1-1/2 2153A7906 D2153A7906
1-1/2 1-1/2 1-1/2 2153B8900 D2153B8900
2 2 2-1/2 2153A9903 D2153A9903
2 2-1/2 2-1/2 2-1/2 2153A9902 D2153A9902
Size Flow C V  (Nl/min) Average response constant Weight lb (kg)
Body Port 1 Port 2 Port 3 USA F
Weight
lb (kg
1-2 2-3 1-2 2-3
3/8 1/4 1/4 1/2 2.4 (2362) 3.4 (3346) ten 1.60 2.30 1.8 (0.8)
3/8 3/8 1/2 2.4 (2362) 3.4 (3346) ten 0.95 1.07
1/2 1/2 1/2 3.0 (2952) 5.2 (5117) ten 0.94 0.98
3/4 1/2 1/2 1 7.8 (7675) 13 (12792) 11 0.38 0.41 4.5 (2.0)
3/4 3/4 1 7.4 (7282) 12 (11808) 11 0.24 0.36
1 1 1 24 (23616) 40 (39360) 28 0.17 0.20
1-1/4 1 1 1-1/2 29 (28536) 39 (38376) 28 0.15 0.19 11.0 (5.0)
1-1/4 1-1/4 1-1/2 30 (29520) 38 (37392) 28 0.12 0.16
1-1/2 1-1/2 1-1/2 30 (29520) 38 (37392) 28 0.12 0.16
2 2 2 2-1/2 70 (68880) 70 (68880) ## ## ## 15.3 (6.9)
2-1/2 2-1/2 2-1/2 70 (68880) 71 (69864) ## ## ## 15.3 (6.9)
*Valve response time – Response time (msec) = M + (F • V). This is the average time required to fill a volume V (cubic inch) to 90% of supply pressure or to discharge it to 10% of supply pressure. M and F values ​​are shown above

EXHAUST SILENCERS

FEMALE SILENCER CONNECTORS

SOLENOID PILOT INDICATOR LIGHT KITS

SOLENOID PILOT MANUAL OVERRIDE KITS

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top