Japan, Royal Master
Royal Master 711NSW Hydraulic Pump Unit – Hydraulic Puncher
Made in Japan
Manufacturer: Royal Master
Model: 711NSW
Feature
All units, from small, lightweight models to powerful types, are chosen by our customers for their excellent operability.
Standard models are used to punch long holes. Long hole bits are also standardized and we have a large inventory. *
Combined with Royal’s powerful double-acting hydraulic pump, these punching machines punch holes quickly, accurately, safely and quietly. **
The new 506NSW, a chisel for small section steel, with a 5｡ taper for channel steel is standard in stock.
*Long holes are an option for 1150SW only.
** The noise is generated when the steel material is very hard.
Technical note:
When making holes with these punches, the hole diameter should be larger than the material thickness (SS400).
Specifications
| Maximum capacity | 500kN (50 tons) |
| Maximum capacity (ss400) | 24×16 28×17 |
| Stretch | 110mm |
| Weight | 28kg |
| Use hydraulic pump | 70Mpa(720kgf/cm2) Double-acting type |
| Accessory | 17.5, 22, 20.5, 24 |
Maximum punching speed (Classified by pump/punch combination)
| awl | 711NSW | ||
| Time (seconds) | Punch | Return | |
Hyd. pump | D-3SW | 2.3 | 1.2 |
| D-2SW | 3.5 | 1.7 | |
| D-1SW | 3.0 | 1.7 | |
| 1SW-40 | 13.0 | 7.0 | |
Related Products
-
SAKUSAKU EHB412120 Square End Mill 4-Flute
-
IMADA OP-MX2EMX-IC/OP-MX250-IC Interlocking Shield Option for Motorized Test Stand
-
Vessel No.AMD14S “Cushion” Drill Bit Set (for steel) 14-Piece Set (O/D 1.5,2.0,2.5,2.8,3.0,3.2,3.5,4.0,4.5,5.0,5.5,6.0,6.5,7.0mm (1 each))
-
KONAN ATS2C Sampling Valves 2-Port Small Diameter Straight-line Piping Air-operated Type
-
Tohnichi FR Beam type Torque Wrench
-
Kanetec MCO MAGNETIC CHIP CONVEYOR
REQUEST QUOTATION
PAYMENT
LINK
