,

Sanwa Tekki Hydraulic Compression Tools

Made in: Japan
Manufacturer: SANWA TEKKI
Model : Hydraulic Compression Tools

Engine-driven hydraulic pump and heads

Powered by a gasoline engine, this hydraulic pump seamlessly operates in conjunction with both 100-ton and 200-ton compression heads, ensuring versatile and efficient performance.
Connecting to the compression head through a hydraulic hose, this pump facilitates the creation of compression joints for electric wires and cables, showcasing its utility and efficiency. Powered with a four-cycle air-cooled engine, this pump is easy to start and easy to maintain.

Hydraulic Compression ToolsHydraulic Compression Tools

(Pump specifications)

Model SEP5B-CE
Rated pressure 68.6 MPa
Pump capacity
(Discharge)
Low pressure (4.9 MPa): 13.4 L/min.
High pressure (68.6 MPa): 2.4 L/min.
Outline dimensions 590 mm (W) x 430 mm (D) x 525 mm (H)
Weight Approx. 61 kg
Fuel Regular unleaded gasoline
Compatible
compression head
Model SR100C2-CE, Model SR200M-CE

(Head specifications)

Model SR100C2-CE SR200M-CE
Nominal compression force 980 kN (100 tons) 1960 kN (200 tons)
Rated pressure 68.6MPa
Maximum diameter of sleeve that can be compressed φ76mm φ90mm
Weight Approx. 33 kg Approx. 98 kg

Motor-driven hydraulic pumps (Type SMP1)

モーター式油圧ポンプ(SMP1型)

SMP1-1

Driven by a motor, this hydraulic pump model operates efficiently with a 100-t compression head, connecting through a hydraulic hose to facilitate the creation of compression joints for electric wires and cables, showcasing both functionality and efficiency.
It is suitable for compression work for underground lines and inside buildings.

Model SMP1-1 SMP1-2
Rated pressure 68.6MPa
Pump capacity
(Discharge)
at 50 Hz
Low pressure
(4.9 MPa): 5.4 L/min.
Intermediate pressure
(19.6 MPa):1.0 L/min.
High pressure
(68.6 MPa): 0.5 L/min.
Low pressure
(4.9 MPa): 6.5 L/min.
Intermediate pressure
(19.6 MPa):1.2 L/min.
High pressure
(68.6 MPa): 0.6 L/min.
Outer dimensions 590 mm (W) x 380 mm (D) x 525 mm (H)
Weight Approx. 60 kg
Power supply Single-phase 100 VAC Single-phase 200 VAC
Compatible
compression head
Model SR100C2-CE

You can request customization for this pump type to operate at any voltage, ensuring its adaptability and suitability for your specific needs.

Motorized hydraulic pumps (Type SMP3)

モーター式油圧ポンプ(SMP3型)

SMP3

A motor powers this hydraulic pump, facilitating smooth operation with 100-t and 200-t compression heads, connecting through a hydraulic hose for efficient electric wire and cable compression joint creation.
When supplied with single-phase or three-phase 200 V (220 V) power, the pump achieves high-speed and highly efficient compression work for underground lines or inside buildings.

Model SMP3 SMP3-WI
Rated pressure 68.6MPa
Pump capacity
(Discharge)
at 50 Hz
Low pressure
(4.9 MPa):10.7 L/min.
High pressure
(68.6 MPa):1.9 L/min.
Low pressure
(4.9 MPa):8.6 L/min.
High pressure
(68.6 MPa):1.9 L/min.
Outer dimensions 590 mm (W) x 380 mm (D) x 525 mm (H)
Weight Approx. 62 kg Approx. 67 kg
Power supply Three-phase 200 VAC (50/60 Hz) Single-phase 220 VAC (50 Hz)
Compatible compression head Model SR100C2-CE, Model SR200M-CE

(Other voltages can be supported on a case-by-case basis.)

Manual compression tool (Model SH-12C2)

手動圧縮機(SH-12C2)

SH-12C2

This compression tool is composed of a pump and a head, and it allows for manual compression with a force of 12 tons.
This tool is equipped with a double-acting mechanism and has a structure that prevents sleeve jams. As such, it is mainly used for making compression joints of distribution lines.
It is capable of holding a sleeve before starting compression to achieve accurate compression.

Model SH-12C2
Nominal compression force 117.7 kN (12 tons)
Rated pressure 68.6MPa
Maximum diameter of sleeve that can be compressed φ30mm
Outer dimensions 580 mm (W) x 70 mm (D) x 180 mm (H)
Weight Approx. 5.9 kg

Hydraulic cutter (Model SRK48)

This cutter allows for highly efficient cutting of electric wires when used in combination with a variety of pumps designed to work with a 100-t head or a 100- and 200-t head. The cutter is equipped with a double-acting mechanism and has a structure that prevents the blade from getting stuck during cutting. It can also be used upright on the optional base designed specifically for it.

Model SRK48
Rated power 134 kN (13.7 tons)
Rated pressure 68.6MPa
Maximum diameter of
electric wire that
can be cut
Steel-core aluminum stranded wire
1,160 mm2 (φ46.2 mm)Hard-drawn aluminum stranded wire
1,260 mm2(φ46.2 mm)Hard-drawn copper stranded wire
1,000 mm2 (φ41.6 mm)

Aluminized steel stranded wire
240 mm2 (φ20.0 mm)

Outer dimensions 414 mm (W) x 96 mm (D) x 194 mm (H)
Weight Approx. 9 kg (Base: 6.5 kg)
Compatible pump SEP5B-CE, Model SMP1, Model SMP3

* The blade is a consumable part and can be replaced.

Pole crusher (Model SPC-40)

ポールクラッシャー(SPC-40型)

SPC-40

This device works with a variety of pumps to crush removed telephone poles. It can crush telephone poles with a diameter of 190 mm to 400 mm.
This pole crusher works effectively in narrow areas inaccessible to large heavy machinery.

Model SPC-40
Rated output 343 kN (35.0 tons)
Rated pressure 68.6MPa
Outer diameter of telephone pole that can be crushed φ190 mm to φ400 mm
(An accessory attachment for small-diameter poles is necessary for crushing telephone poles with a diameter of 190 mm to 280 mm.)
Outer dimensions 680 mm (W) (excluding the handle) x 620 mm (H)
Weight Approx. 60 kg
Compatible pump SEP5B-CE, Model SMP3

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top