Japan, Sawada
Sawada T-20-J type Level gauge – Healing/Cooling Type Level Gauge
Made in Japan
Manufacturer: Sawada Manufacturing Co., Ltd
Model: T-20-J type Level
This is a level gauge that allows you to see the liquid level of a liquid that solidifies without heating or cooling. A jacket pipe is closely attached to the outside of the level gauge body, and steam for heating and cooling water for cooling are allowed to flow, preventing changes in the temperature inside the liquid chamber and stabilizing the liquid level.
Diversity
-
- Two types can be selected: reflection type and see-through type.
Usage
- Compatible with highly coagulable fluids.
- Compatible with boiling liquids.
Specifications
- connection type: Flange・Screw・Socket
- Maximum working pressure: 4.0 MPa
- Maximum operating temperature: 350℃
- Material: S25C, SUS304/316/316L
- Installation length: 360-3000mm
Standard dimension table – Single type
glass count | gauge glass length | T-20-J type | |
Visible length (VL) | Installation length (C.to.C.) | ||
No.3B | 165 | 141 | 360 |
No.4B | 190 | 166 | 385 |
No.5B | 220 | 196 | 415 |
No.6B | 250 | 226 | 445 |
No.7B | 280 | 256 | 475 |
No.300B | 300 | 276 | 495 |
No.8B | 320 | 296 | 515 |
No.9B | 340 | 316 | 535 |
(Note) 1. Gauge glass dimensions conform to JIS B 8211. 2.The mounting length is for the valve model KS20-J. 3.Coupling type is also available.
Standard dimension table (compound type)
Glass count x number of compounds |
T-20-J type | |
Visible length (VL) | Installation length (C.to.C.) | |
No.5B×2 | 437 | 675 |
No.6B×2 | 497 | 735 |
No.7B×2 | 557 | 795 |
No.300B×2 | 597 | 835 |
No.8B×2 | 637 | 875 |
No.9B×2 | 677 | 920 |
No.6B×3 | 768 | 1010 |
No.7B×3 | 858 | 1100 |
No.300B×3 | 918 | 1160 |
No.8B×3 | 978 | 1220 |
No.9B×3 | 1038 | 1280 |
No.7B×4 | 1159 | 1400 |
No.300B×4 | 1239 | 1480 |
No.8B×4 | 1319 | 1560 |
No.9B×4 | 1399 | 1640 |
No.7B×5 | 1460 | 1700 |
No.300B×5 | 1560 | 1800 |
No.8B×5 | 1660 | 1900 |
No.9B×5 | 1760 | 2000 |
(Note) 1. Mounting length is the dimension for valve type KS20. 2. The installation length is the minimum value.
3.The intermediate invisible part length is 40mm for UZ-J and 45mm for T-20-J. 4. If the number of compounds is large, an indicator will be attached.
Related Products
-
DIJET ZPMT100304ZER-PL, ZPMT100308ZER-PL, ZPMT100320ZER-P Shoulder Milling Insert (From Semi-finishing To Finishing)
-
KONAN 453S/453D Series 5-Port Solenoid Valves Pressure-resistant Packing Return Type
-
Kamoi Kakoshi Kabuki S – Masking Tape for Construction Painting
-
Ogura HPC-N209W Electro-Hydraulic Hole Punchers
-
NAC – TL TYPE Stainless steel (SUS304) SF (Female thread)
-
Shinano SI-1860 1″ Impact Wrench Standard Air Tools