Japan, Shimizu
Shimizu Super Board Canna – Carpenter Tools
Made in Japan
Manufacturer: Shimizu Manufacturing Co., Ltd
Features
- The replacement blade is mounted at an acute angle to cut the surface paper of the gypsum board, achieving outstanding sharpness compared to conventional products. *The blade mounting angle is set to 30° and the pedestal angle is set to 12°.
- The chamfering width can be adjusted steplessly. Easy to adjust with a sliding presser foot.
- Since the blade can be used by sliding it, it can be used from end to end without waste, making it economical.
- Since the whole blade is firmly fixed by holding down the entire blade with a presser foot, the blade does not move during work.
- Uses a single-edged blade with good sharpness. Of course, commercially available L-shaped cutter blades can also be used.
- The main body is made of DURACON® resin containing glass fiber, which has good slippage and excellent durability. *Duracon® is a registered trademark of Polyplastics Co., Ltd.
Usage
For chamfering and flattening gypsum board
| part number | Model | JAN code |
| 12069 | Type A | 306083 |
| 12070 | 3 spare blades included | 306090 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Related Products
-
TSURUMI PUMP PARTS: O-RING Parts & Accessories
-
Shinagawa Sokki Liquid Free Type Temperature Compensated Pressure Switch
-
TSUBOSAN 12-PCS Length 140mm Precision Needle Files
-
TAIYO AHU2-100/160 Press / Air-Oil (Air Oil System）
-
YOSHITAKE GP-1210TS Pressure Reducing Valve – Air
-
H.H.H Double Eye Swivel (Bearing Included) YOB
REQUEST QUOTATION
PAYMENT
LINK
